Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 6904ZZ (I.D.=20mm, O.D.=37mm, Thickness=9mm)
BulletPoint2 : 6904-2Z bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Made from Carbon Steel, durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 3680 newtons and dynamic load rating of 6380 newtons
ExternallyAssignedProductIdentifier1 : 630148604084
ExternallyAssignedProductIdentifier2 : 0630148604084
IncludedComponents : MR105-2RS
ItemName : uxcell 6904ZZ Deep Groove Ball Bearings Z2 20mm X 37mm X 9mm Double Shielded Carbon Steel 10pcs
ItemPackageDimensions_Height : 13.97 centimeters
ItemPackageDimensions_Length : 3.81 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a19090200ux0018
NumberOfItems : 10
PackageLevel : unit
PartNumber : a19090200ux0018
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 6904ZZ
Seal Type: Double Shielded
Inner Race/Outer Race Material: Carbon Steel
Cage Material: Stamping Steel
Inner Diameter (d): 20mm
Outer Diameter (D): 37mm
Thickness (B): 9mm
Dynamic Load Rating (Cr): 6380N
Static Load Rating (Cor): 3680N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 10 Pcs

ProductSiteLaunchDate : 2019-11-15T09:30:30.140Z
Size : 20mmx37mmx9mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31171500