Specification Brand : uxcell BulletPoint1 : 6903-2RS (I.D.=17mm, O.D.=30mm, Thickness=7mm) (Marked with 6903RS on the seals) BulletPoint2 : 6903-2RS bearings are Sealed on BOTH SIDES to keep lubricant in BulletPoint3 : Made from Carbon Steel, durability and resistance to under heavy loads BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use BulletPoint5 : Static load rating of 2600 newtons and dynamic load rating of 4600 newtons ItemName : uxcell 6903-2RS Deep Groove Ball Bearings Z2 17mm x 30mm x 7mm Double Sealed Carbon Steel 10pcs ItemPackageDimensions_Height : 13.6 centimeters ItemPackageDimensions_Length : 3.4 centimeters ItemPackageDimensions_Width : 8.5 centimeters ItemPackageQuantity : 10 ItemTypeKeyword : deep-groove-ball-bearings Manufacturer : uxcell Material : Steel ModelNumber : a19082100ux1584 NumberOfItems : 10 PartNumber : a19082100ux1584 ProductDescription : NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for hardness. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selecting Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification: Model: 6903-2RS (Marked with 6001RS on the seals) Seal Type: Double Sealed Inner Race/Outer Race Material: Carbon Steel Cage Material: Stamping Steel Inner Diameter (d): 17mm Outer Diameter (D): 30mm Thickness (B): 7mm Dynamic Load Rating (Cr): 4600N Static Load Rating (Cor): 2600N Accuracy Class: P0 (ABEC-1) Noise Level: Z2 Number of Pack: 10 Pcs