Specification Brand : uxcell BulletPoint1 : 6903-2RS (I.D.=17mm, O.D.=30mm, Thickness=7mm) BulletPoint2 : 6903rs bearings are sealed on BOTH SIDES to keep lubricant in BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise BulletPoint4 : ABEC Tolerance 3 (P6), Z1 Noise Level for most general use BulletPoint5 : Static load rating of 2600 newtons and dynamic load rating of 4600 newtons CustomerPackageType : Standard Packaging ExternallyAssignedProductIdentifier1 : 604697186391 ExternallyAssignedProductIdentifier2 : 713072774907 ExternallyAssignedProductIdentifier3 : 0604697186391 ExternallyAssignedProductIdentifier4 : 0713072774907 IncludedComponents : 6203-2RS ItemName : uxcell 6903-2RS Deep Groove Ball Bearing 17x30x7mm Double Sealed ABEC-3 Bearings 2-Pack ItemPackageDimensions_Height : 15.24 centimeters ItemPackageDimensions_Length : 2.54 centimeters ItemPackageDimensions_Width : 10.16 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : deep-groove-ball-bearings Manufacturer : uxcell Material : Steel Material1 : High Carbon Steel Material2 : White POM ModelNumber : a19041900ux0197 NumberOfItems : 1 PartNumber : a19041900ux0197 ProductDescription : NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selecting Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.