Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 681k (I.D.=1mm, O.D.=3mm, Thickness=1.5mm)
BulletPoint2 : 681k bearings are open type for lubricating
BulletPoint3 : Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 21 newtons and dynamic load rating of 82 newtons
Color : 63004 20x42x16
ExternallyAssignedProductIdentifier : 7630964323803
ExternallyAssignedProductIdentifier1 : 0008649946338
ExternallyAssignedProductIdentifier2 : 008649946338
GpsrSafetyAttestation : 1
IncludedComponents : MF74ZZx10
ItemName : uxcell 681k Deep Groove Ball Bearings 1mm Inner Dia 3mm OD 1.5mm Bore Open Type Chrome Steel Z2 10pcs
ItemPackageDimensions_Height : 14.7 centimeters
ItemPackageDimensions_Length : 0.6 centimeters
ItemPackageDimensions_Width : 9.9 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a19092000ux1175
NumberOfItems : 10
PackageLevel : unit
PartNumber : a19092000ux1175
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 681k
Seal Type: Open Type
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 1mm
Outer Diameter (D): 3mm
Thickness (B): 1.5mm
Dynamic Load Rating (Cr): 82N
Static Load Rating (Cor): 21N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 10 Pcs

ProductSiteLaunchDate : 2019-12-13T10:00:31.498Z
Size : 1x3x1.5mm
SpecificationMet : DIN 728
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31171500