Specification Brand : uxcell BulletPoint1 : 6806-2RS (I.D.=30mm, O.D.=42mm, Thickness=7mm) BulletPoint2 : 6806rs bearings are sealed on BOTH SIDES to keep lubricant in BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise BulletPoint4 : ABEC Tolerance 3 (P6), Z1 Noise Level for most general use BulletPoint5 : Static load rating of 3400 newtons and dynamic load rating of 4550 newtons Color : Silver CustomerPackageType : Standard Packaging ExternallyAssignedProductIdentifier : 6440891423597 IncludedComponents : Deep Groove Ball Bearings ItemName : uxcell 6806-2RS Deep Groove Ball Bearing 30x42x7mm Double Sealed ABEC-3 Bearings 2-Pack ItemPackageDimensions_Height : 12.7 centimeters ItemPackageDimensions_Length : 1.524 centimeters ItemPackageDimensions_Width : 8.382 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : deep-groove-ball-bearings Manufacturer : uxcell Material : Steel Material1 : Stainless Steel Material2 : Rubber ModelNumber : a19042400ux1132 NumberOfItems : 10 PackageLevel : unit PartNumber : a19042400ux1132 ProductDescription : NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selecting Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.