Cart 2 india

Specification
Brand : uxcell
BulletPoint : ABEC RATING: ABEC1Ball Diameter: 3.969Ball Grade: 10Ball Material: AISI 52100 Chrome SteelNumber Of Balls: 7Bearing Material: AISI 52100 Chrome Steel# Of Shields: 2Inside Diameter: 8mmOutside Diameter: 22mmWidth: 7mmBasic Load: 1370 NDynamic Load: 3300 NWorking Temperature: -20 to 120 CRPM w/ Grease: 33,000RPM w/ Oil: 39,000Chrome steel ball bearing for durability and resistance to deformity under heavy loads. There are a total of 7 balls of grade 10. The shield protects the working parts of the
BulletPoint1 : 6801ZZ (I.D.=12mm, O.D.=21mm, Thickness=5mm)
BulletPoint2 : 6801zz bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
BulletPoint5 : Static load rating of 1000 newtons and dynamic load rating of 1900 newtons
ExternallyAssignedProductIdentifier1 : 0688938510084
ExternallyAssignedProductIdentifier2 : 00688938510084
ExternallyAssignedProductIdentifier3 : 688938510084
IncludedComponents : bearing
ItemName : uxcell 6801ZZ Deep Groove Ball Bearing 12x21x5mm Double Shielded Chrome Steel Bearings 2-Pack
ItemPackageDimensions_Height : 15.24 centimeters
ItemPackageDimensions_Length : 0.508 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a18111500ux0775
NumberOfItems : 5
PartNumber : a18111500ux0775
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 6801ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 12mm
Outer Diameter (D): 21mm
Thickness (B): 5mm
Dynamic Load Rating (Cr): 1.9kN
Static Load Rating (Cor): 1kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 2 Pcs

ProductSiteLaunchDate : 2019-01-18T07:01:13.065Z
Size : 12x21x5mm
SpecificationMet : ABEC 3
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31171500