Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 6300-2RS (I.D.=10mm, O.D.=35mm, Thickness=11mm)
BulletPoint2 : 6300 2RS bearings are sealed on BOTH SIDES to keep lubricant in
BulletPoint3 : Made from Carbon Steel, durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 3450 newtons and dynamic load rating of 8100 newtons
ItemName : uxcell 6300-2RS Deep Groove Ball Bearings Z2 10mm X 35mm X 11mm Double Shielded Carbon Steel 10 pcs
ItemPackageDimensions_Height : 17.6 centimeters
ItemPackageDimensions_Length : 5.5 centimeters
ItemPackageDimensions_Width : 12.1 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Carbon Steel
ModelNumber : a19090200ux0067
PartNumber : a19090200ux0067
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 6300-2RS
Seal Type: Double Sealed
Inner Race/Outer Race Material: Carbon Steel
Cage Material: Stamping Steel
Inner Diameter (d): 10mm
Outer Diameter (D): 35mm
Thickness (B): 11mm
Dynamic Load Rating (Cr): 8100N
Static Load Rating (Cor): 3450N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 10 Pcs

ProductSiteLaunchDate : 2019-11-15T09:30:29.888Z
Size : 10mmx35mmx11mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31171500