Specification Brand : uxcell BulletPoint1 : 625ZZ (I.D.=5mm, O.D.=16mm, Thickness=5mm) BulletPoint2 : 625zz bearings are shielded on BOTH SIDES to keep lubricant in BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use BulletPoint5 : Static load rating of 670 newtons and dynamic load rating of 1750 newtons Color : 10x MR63ZZ ExternallyAssignedProductIdentifier1 : 602451807889 ExternallyAssignedProductIdentifier2 : 0602451807889 IncludedComponents : NO ItemName : uxcell 625ZZ Deep Groove Ball Bearing 5x16x5mm Double Shielded Chrome Steel Bearings 5-Pack ItemPackageDimensions_Height : 14.7 centimeters ItemPackageDimensions_Length : 2.4 centimeters ItemPackageDimensions_Width : 11.5 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : deep-groove-ball-bearings Manufacturer : uxcell Material : Steel ModelNumber : a18111500ux0734 NumberOfItems : 200 PackageLevel : unit PartNumber : a18111500ux0734 ProductDescription : NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.