Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 6208ZZ (I.D.=40mm, O.D.=80mm, Thickness=18mm)
BulletPoint2 : 6208-2Z bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Made from Carbon Steel, features with good anti-rust and corrosion resistance
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 17800 newtons and dynamic load rating of 29100 newtons
Color : silver tone
ExternallyAssignedProductIdentifier : 4894878082772
ExternallyAssignedProductIdentifier1 : 841339018959
ExternallyAssignedProductIdentifier2 : 0841339018959
IncludedComponents : Deep Groove Ball bearing
ItemDisplayDimensions_Length : 30 millimeters
ItemDisplayWeight : 0.2 kilograms
ItemName : uxcell 6208ZZ Deep Groove Ball Bearings Z2 40mm X 80mm X 18mm Double Shielded Carbon Steel
ItemPackageDimensions_Height : 9.144 centimeters
ItemPackageDimensions_Length : 4.826 centimeters
ItemPackageDimensions_Width : 8.636 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a19090200ux0087
NumberOfItems : 1
PackageLevel : unit
PartNumber : a19090200ux0087
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: MR105-2RS
Seal Type: Double Sealed
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 5mm
Outer Diameter (D): 10mm
Thickness (B): 4mm
Dynamic Load Rating (Cr): 366N
Static Load Rating (Cor): 135N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 20 Pcs

ProductSiteLaunchDate : 2019-12-08T03:22:17.849Z
Size : 40mmx80mmx18mm
SpecificationMet : Ul
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 31171500