Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Size: 6200ZZ (Inner Dia.=10mm, Outer Dia.=30mm, Thickness=9mm)
BulletPoint2 : Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
BulletPoint3 : Made from Carbon Steel, durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
BulletPoint5 : Pre-Lubricated, Easy to maintain
Color : OneColor
ExternallyAssignedProductIdentifier : 9009344502929
ExternallyAssignedProductIdentifier1 : 0700721879939
ExternallyAssignedProductIdentifier2 : 700721879939
IncludedComponents : 1310
ItemName : uxcell 6200ZZ Ball Bearing 10mm x 30mm x 9mm Double Shielded 6200-2Z 80200 Deep Groove Bearings, Carbon Steel (Pack of 10)
ItemPackageDimensions_Height : 17.3 centimeters
ItemPackageDimensions_Length : 3.8 centimeters
ItemPackageDimensions_Width : 13.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a18052100ux0007
NumberOfItems : 1
PackageLevel : unit
PartNumber : a18052100ux0007
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Uxcell's Deep Groove Ball Bearings are cost-effective and require little maintenance.
Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Single-row, pre-lubricated, normal accuracy.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 6200ZZ
Shield Type: Double Shield
Material: High-Carbon Steel
Heat Treatment: Quenching

Hardness: HRC50-55
Cage Material: Stamping Steel
Inner Diameter (d): 10mm
Outer Diameter (D): 30mm
Thickness (B): 9mm
Dynamic Load Rating (Cr): 5.1kN
Static Load Rating (Cor): 2.38kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 10 Pcs
Weight: 311g

ProductSiteLaunchDate : 2018-07-25T12:27:30.781Z
Size : 10mmx30mmx9mm
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31171500