Cart 2 india

Specification
Brand : uxcell
BulletPoint : Self-Aligning Ball Bearings
BulletPoint1 : Size: 608-2RS (Inner Dia.=8mm, Outer Dia.=22mm, Thickness=7mm)
BulletPoint2 : Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
BulletPoint3 : Made from High Carbon Steel, durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
BulletPoint5 : Same As 608-2RS / 180016. Pre-Lubricated, Easy to maintain
Color : silver tone
ExternallyAssignedProductIdentifier : 4894878083359
ExternallyAssignedProductIdentifier1 : 723888875569
ExternallyAssignedProductIdentifier2 : 0723888875569
IncludedComponents : Deep Groove Ball bearing
ItemName : uxcell 608-2RS Deep Groove Ball Bearing Double Rubber Sealed 180016, 8mm X 22mm X 7mm High Carbon Steel Z1 Bearings (Pack of 20)
ItemPackageDimensions_Height : 10.3 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 8.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Rubber,Steel
ModelNumber : a18051900ux0219
NumberOfItems : 10
PackageLevel : unit
PartNumber : a18051900ux0219
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Uxcell's Deep Groove Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Single-row, pre-lubricated, normal accuracy.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 608-2RS
Sealed Type: Double Sealed
Material:High Carbon Steel
Heat Treatment:Quenching
Hardness: HRC50-55
Cage Material: Stamping Steel
Inner Diameter (d): 8mm
Outer Diameter (D): 22mm
Thickness (B): 7mm
Dynamic Load Rating (Cr): 3.3kN
Static Load Rating (Cor): 1.35kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack:20 Pcs
Weight: 233g

ProductSiteLaunchDate : 2018-07-11T09:10:36.522Z
Size : 8mmx22mmx7mm
SpecificationMet : Iso
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 31171500