Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : [Size] 6002ZZ. Inner Diameter (d): 15mm / 0.59", Outer Diameter (D): 32mm / 1.26", Thickness (B): 9mm / 0.35"
BulletPoint2 : [Material] Made of Carbon Steel material features good anti-rust and corrosion resistance. Smooth surface, high hardness, high load capacity, wear-resistant.
BulletPoint3 : [Function] Bushings can be used for different purposes such as positioning, wear, and vibration damping, or to isolate the shaft from special media to increase shaft life.
BulletPoint4 : [Application] They can also be used to reduce drilling or to replace worn original bushings on wheels. ABEC Tolerance 1 (P0) for most general use
BulletPoint5 : [Package Contents] 8 x Ball Bearing
ExternallyAssignedProductIdentifier : 5056133374094
ExternallyAssignedProductIdentifier1 : 4547359003581
ExternallyAssignedProductIdentifier2 : 04547359003581
ItemName : uxcell 6002ZZ Ball Bearing 15mm x 32mm x 9mm Double Shielded 6002-2Z 80102 Deep Groove Bearings High Carbon Steel Z1 (Pack of 8)
ItemPackageDimensions_Height : 13.4 centimeters
ItemPackageDimensions_Length : 4.9 centimeters
ItemPackageDimensions_Width : 8.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Metal
ModelNumber : a18051900ux0189
NumberOfItems : 1
PartNumber : a18051900ux0189
ProductDescription : NOTE：
Please refer to the picture and select the right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product
Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and loads in both directions.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Uxcell's Deep Groove Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Single-row, pre-lubricated, normal accuracy.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:

Model: 6002ZZ

Shield Type: Double Shield

Material: High Carbon Steel

Heat Treatment: Quenching

Hardness: HRC50-55

Cage Material: Stamping Steel

Inner Diameter (d): 15mm

Outer Diameter (D): 32mm

Thickness (B): 9mm

Dynamic Load Rating (Cr): 5.58kN

Static Load Rating (Cor): 2.85kN

Accuracy Class: P0 (ABEC-1)

Noise Level: Z1

Number of Pack: 8 Pcs

Weight: 233g



ProductSiteLaunchDate : 2018-07-11T09:09:58.654Z
Size : 15mmx32mmx9mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1