Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Size: 6001Z (Inner Dia.=12mm, Outer Dia.=28mm, Thickness=8mm)
BulletPoint2 : Shield on SINGLE SIDE of the bearing for easy lubrication and maintenance while protecting from dirt. Ideal for vertical installation
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Pre-Lubricated, Easy to maintain
ItemName : uxcell 6001Z Deep Groove Ball Bearing Single Shield 60101, 12mm x 28mm x 8mm Chrome Steel Bearings (Pack of 1)
ItemPackageDimensions_Height : 13.9 centimeters
ItemPackageDimensions_Length : 0.7 centimeters
ItemPackageDimensions_Width : 9.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a18051100ux0062
PartNumber : a18051100ux0062
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
Single-row, pre-lubricated, normal accuracy.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 6001Z
Shield Type: Single Shield
Cage Material: Stamping Steel
Inner Diameter (d): 12mm
Outer Diameter (D): 28mm
Thickness (B): 8mm
Dynamic Load Rating (Cr): 5.58kN
Static Load Rating (Cor): 2.85kN
Accuracy Class: P0 (ABEC1)
Noise Level: Z2
Number of Pack: 1 Pcs
Weight: 21g

ProductSiteLaunchDate : 2018-06-11T09:13:04.373Z
Size : 12mmx28mmx8mm
SupplierDeclaredDgHzRegulation : not_applicable