Cart 2 india

Specification
Brand : uxcell
BulletPoint : Ball Bearing
BulletPoint1 : 6000-2RS (I.D.=10mm, O.D.=26mm, Thickness=8mm)
BulletPoint2 : 6000 2RS bearings are sealed on BOTH SIDES to keep lubricant in
BulletPoint3 : Made from Carbon Steel, durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 1950 newtons and dynamic load rating of 4550 newtons
ExternallyAssignedProductIdentifier : 7082153940238
ExternallyAssignedProductIdentifier1 : 7316577067784
ExternallyAssignedProductIdentifier2 : 07316577067784
IncludedComponents : chrome steel
ItemName : uxcell 6000-2RS Deep Groove Ball Bearings Z2 10mm x 26mm x 8mm Double Sealed Carbon Steel 2pcs
ItemPackageDimensions_Height : 12.6 centimeters
ItemPackageDimensions_Length : 1.7 centimeters
ItemPackageDimensions_Width : 4.7 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Carbon Steel
ModelNumber : a19090200ux0161
NationalStockNumber : 3110-01-045-8427
NumberOfItems : 4
PartNumber : a19090200ux0161
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Carbon Steel bearings are better in toughness than chrome steel bearings after quenching.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 6000-2RS
Seal Type: Double Shielded
Inner Race/Outer Race Material: Carbon Steel
Cage Material: Stamping Steel
Inner Diameter (d): 10mm
Outer Diameter (D): 26mm
Thickness (B): 8mm
Dynamic Load Rating (Cr): 4550N
Static Load Rating (Cor): 1950N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 2 Pcs

ProductSiteLaunchDate : 2019-11-29T08:32:20.861Z
Size : 10mmx26mmx8mm
SpecificationMet : Ul
SpecificationMet1 : EN 10111
SpecificationMet2 : DIN 623-1
SpecificationMet3 : ISO 281
SpecificationMet4 : ISO 683-17
SpecificationMet5 : ISO 199
SpecificationMet6 : DIN ISO 281
SpecificationMet7 : ISO 104
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31171500