Cart 2 india

Specification
Brand : uxcell
BulletPoint : ABEC RATING: ABEC1Ball Diameter: 3.969Ball Grade: 10Ball Material: AISI 52100 Chrome SteelNumber Of Balls: 7Bearing Material: AISI 52100 Chrome Steel# Of Shields: 2Inside Diameter: 8mmOutside Diameter: 22mmWidth: 7mmBasic Load: 1370 NDynamic Load: 3300 NWorking Temperature: -20 to 120 CRPM w/ Grease: 33,000RPM w/ Oil: 39,000Chrome steel ball bearing for durability and resistance to deformity under heavy loads. There are a total of 7 balls of grade 10. The shield protects the working parts of the
BulletPoint1 : 1605-2RS (I.D.=5/16inch, O.D.=29/32inch, Thickness=5/16inch)
BulletPoint2 : 1605 2RS bearings are sealed on BOTH SIDES to keep lubricant in
BulletPoint3 : Made from Chromium Steel (GCr15), durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 315 newtons and dynamic load rating of 745 newtons
ExternallyAssignedProductIdentifier1 : 0688938510084
ExternallyAssignedProductIdentifier2 : 00688938510084
ExternallyAssignedProductIdentifier3 : 688938510084
IncludedComponents : bearing
ItemName : uxcell 1605-2RS Deep Groove Ball Bearings Z2 5/16 X 29/32 X 5/16inch Double Sealed Chrome Steel 5pcs
ItemPackageDimensions_Height : 14 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 9.7 centimeters
ItemPackageQuantity : 5
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : U624ZZ
NumberOfItems : 5
PartNumber : a19092900ux0597
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 1605-2RS
Seal Type: Double Sealed
Inner Race/Outer Race Material: Chromium Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 5/16inch
Outer Diameter (D): 29/32inch
Thickness (B): 5/16inch
Dynamic Load Rating (Cr): 745N
Static Load Rating (Cor): 315N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 5 Pcs

ProductSiteLaunchDate : 2019-11-29T08:00:37.597Z
Size : 5/16"x29/32"x5/16"
SpecificationMet : ABEC 3
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31170000