Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 1604-2RS (I.D.=3/8inch, O.D.=7/8inch, Thickness=11/32inch)
BulletPoint2 : 1604 2RS bearings are sealed on BOTH SIDES to keep lubricant in
BulletPoint3 : Made from Chromium Steel (GCr15), features with good anti-rust and corrosion resistance
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 320 newtons and dynamic load rating of 750 newtons
Color : silver tone
ExternallyAssignedProductIdentifier : 4894878063276
IncludedComponents : 20 Pack 608-2RS Bearing
ItemName : uxcell 1604-2RS Deep Groove Ball Bearings Z2 3/8 X 7/8 X 11/32inch Double Sealed Chrome Steel 10pcs
ItemPackageDimensions_Height : 12.7 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 9.652 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Alloy Steel
ModelNumber : a19092900ux0593
NumberOfItems : 10
PackageLevel : unit
PartNumber : a19092900ux0593
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 1604-2RS
Seal Type: Double Sealed
Inner Race/Outer Race Material: Chromium Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 3/8inch
Outer Diameter (D): 7/8inch
Thickness (B): 11/32inch
Dynamic Load Rating (Cr): 750N
Static Load Rating (Cor): 320N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 10 Pcs

ProductSiteLaunchDate : 2020-05-06T06:17:39.405Z
Size : 3/8"x7/8"x11/32"
SpecificationMet : ABEC 3
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31171500