Cart 2 india

Specification
Brand : SKF
BulletPoint : Self-Aligning Ball Bearings
BulletPoint1 : Deep-groove geometry for high speeds and supporting both radial and axial loads
BulletPoint2 : Single-row bearing for supporting radial loads
BulletPoint3 : C4 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) and C3 to compensate for thermal expansion
BulletPoint4 : Conforms to ABEC 1 precision standard for performance within a narrow range of variation
BulletPoint5 : Brass cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise
Color : silver
ExternallyAssignedProductIdentifier : 7341568352396
ExternallyAssignedProductIdentifier1 : 7316576611988
ExternallyAssignedProductIdentifier2 : 07316576611988
GpsrSafetyAttestation : 1
IncludedComponents : Deep Groove Bearings
ItemDisplayWeight : 0.11 kilograms
ItemName : SKF 6204/C4 Radial Bearing, Single Row, Deep Groove Design, ABEC 1 Precision, Open, C4 Clearance, Standard Cage, 20mm Bore, 47mm OD, 14mm Width
ItemPackageDimensions_Height : 5.6 centimeters
ItemPackageDimensions_Length : 1.7 centimeters
ItemPackageDimensions_Width : 5.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : SKF
Material : Brass
ModelNumber : 6204/C4
NumberOfItems : 1
PackageLevel : unit
PartNumber : 6204/C4
ProductDescription :

Specification：

• Model: 623ZZ
• Seal Type: Double Shielded
• Inner Race/Outer Race Material: Chrome Steel (GCr15)
• Cage Material: Stamping Steel
• Inner Diameter (d): 3mm
• Outer Diameter (D): 10mm
• Thickness (B): 4mm
• Accuracy Class: P0 (ABEC-1)
• Noise Level: Z2
• Number of Pack: 20

Feature:

• Single-row, pre-lubricated, normal accuracy.
• Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
•  With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
• These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
•  Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

Selecting Guide:

• Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
• Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

ProductSiteLaunchDate : 2012-07-15T00:00:01-07:00
Size : 623ZZ 3x10x4mm
SpecificationMet1 : EN 10111
SpecificationMet2 : DIN 623-1
SpecificationMet3 : ISO 281
SpecificationMet4 : ISO 683-17
SpecificationMet5 : ISO 199
SpecificationMet6 : DIN ISO 281
SpecificationMet7 : ISO 104
Style : S681 OPEN 1x3x1mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 31171500