Cart 2 india

Specification
Brand : SKF
BulletPoint1 : Specifications: Shaft Dia in/mm: 1.500/38.100 | Bore Dia in/mm: 2.377/60.380 | Outer Dia in/mm: 2.381/60.480 | Width in/mm: 0.453/11.510 | Seal Construction Type: CRWA1 | Seal Lip Material: Nitrile | Boretite: Yes
BulletPoint2 : SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
BulletPoint3 : Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
BulletPoint4 : Sealing element SKF’s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today’s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
BulletPoint5 : The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
Color : Silver
Edition : 91
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier : 5052127036740
ExternallyAssignedProductIdentifier1 : 085311015189
ExternallyAssignedProductIdentifier2 : 0085311015189
ExternallyAssignedProductIdentifier3 : 00085311015189
ExternallyAssignedProductIdentifier4 : 0650209434023
FitType : Vehicle Specific
IncludedComponents : Seal
ItemDisplayWeight : 63 pounds
ItemName : SKF 15041 Transfer Case Rear Output Shaft Seal Spring Loaded with Auxiliary Dirt Lip Positive Fluid Control Compatible with Chevrolet Astro Safari Blazer Jimmy Colorado Canyon Luv S10 Blazer S15 Jimmy
ItemPackageDimensions_Height : 8.2 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 8.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : SKF
Material : Alloy Steel
ModelName : SKF Seal 15041
ModelNumber : 15041
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 15041
ProductDescription : Description:
Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Notice:
Keep clean to prevent dust from entering the bearing.
Do not make strong impact on the bearing during use.
Use proper tools for mounting.
Hot mounting is recommended for machinery and equipment with high precision requirements.
When operating the bearings, pay attention to wear gloves to prevent the bearings from corrosion and rusting.

Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification:

Model: R4ZZ

Shield Type: Double Shielded

Inner Race/Outer Race Material: Chrome Steel (GCr15)

Cage Material: Stamping Steel

Inner Diameter: 1/4"

Outer Diameter: 5/8"

Thickness: 0.196" / 4.978mm

Dynamic Load Rating (Cr): 1.48kN

Static Load Rating (Cor): 0.615kN

Accuracy Class: P0 (ABEC1)

Noise Level: Z2

Number of Pack: 20 Pcs



ProductSiteLaunchDate : 2006-01-01T00:00:01-00:00
Size : R
StreetDate : 2020-10-07T00:00:01Z
Style : CRWA1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
WarrantyDescription : 12 Month 12,000 Miles