Cart 2 india

Specification
Brand : JSB Great Bearings
BulletPoint : 5/8 Ball Bearing: 99502H-2RS bearings has small friction coefficient, high speed limit, simple structure, low manufacturing cost.
BulletPoint1 : Size: 6003RS (Inner Dia.=17mm, Outer Dia.=35mm, Thickness=10mm)
BulletPoint2 : Sealed on SINGLE SIDE of the bearing for easy lubrication and maintenance while protecting from dirt. Suitable for vertical installation
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Pre-Lubricated, Easy to maintain
ExternallyAssignedProductIdentifier1 : 4012801056625
ExternallyAssignedProductIdentifier2 : 04012801056625
GpsrSafetyAttestation : 1
IncludedComponents : 99502H-2RS bearing
ItemName : (Qty. 10) 6202-5/8-2RS C3 EMQ Premium Ball Bearings ABEC-3 6202-10-2RS 5/8” ID
ItemPackageDimensions_Height : 14 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 9.6 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : HCH
Material : Alloy Steel
ModelNumber : 6202-5/8-2RS
NumberOfItems : 1
PartNumber : 6202-5/8-2RS
ProductDescription : ***RPM Limit Grease 20000 rpm Oil 25000 rpm ***Dimension D (Outside) 35 mm d (Inside) Bore 15.875 mm B (Width) 11 mm ***Deep Groove Ball Bearing ISO 9001:2002 ***ABEC Tolerance Codes ABEC3/C3 ***Vibration Level V2+ ***Shield/Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C )
ProductSiteLaunchDate : 2012-11-08T08:00:00.000Z
Size : 17mm x 35mm x 10mm
SpecificationMet : iso
SpecificationMet1 : Din 623-1
SpecificationMet2 : Din 620-4
SpecificationMet3 : Iso 281
SpecificationMet4 : Din 625-1
SpecificationMet5 : Iso 286
SpecificationMet6 : Iso 683-17
SpecificationMet7 : Din Iso 281
SpecificationMet8 : En 10139
SpecificationMet9 : Sae J403
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31171500