Cart 2 india

Specification
Brand : Peer Bearing
BulletPoint1 : Conrad construction bearing is specifically designed to provide maximum performance by means of precise ball complement selection
BulletPoint2 : The honed raceways offer a perfectly balanced bearing capable of operating under straight radial, thrust or combination loads
BulletPoint3 : This series is available with shield, Buna N Seals, or locating rings
BulletPoint4 : Item Package Dimension: 1.75" L x 0.5" W x 1.75" H
BulletPoint5 : Static load rating of 7350 newtons and dynamic load rating of 11200 newtons
ExternallyAssignedProductIdentifier : 1200106985983
ExternallyAssignedProductIdentifier1 : 0823551557003
ExternallyAssignedProductIdentifier2 : 823551557003
ItemName : Peer Bearing 6203-RLD 6200 Series Radial Bearings, 17 mm ID, 40 mm OD, 12 mm Width, Single Lip Seal
ItemPackageDimensions_Height : 1.524 centimeters
ItemPackageDimensions_Length : 4.572 centimeters
ItemPackageDimensions_Width : 4.572 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : Peer Bearing
Material : Alloy Steel
ModelNumber : PER 6203-RLD
NumberOfItems : 1
PartNumber : 6203-RLD
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 16006-2RS
Sealed Type: Double Sealed
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 30mm
Outer Diameter (D): 55mm
Thickness (B): 9mm
Dynamic Load Rating (Cr): 11.2kN
Static Load Rating (Cor): 7.35kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 1 Pcs

ProductSiteLaunchDate : 2014-12-10T08:00:01.000Z
Size : 30mmx55mmx9mm
SpecificationMet : Ul
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1