Cart 2 india

Specification
Brand : NTN
BulletPoint1 : Deep groove geometry for high speeds
BulletPoint2 : Single row for supporting radial loads
BulletPoint3 : Steel cage evenly spaces balls for reduced friction, vibration and noise
BulletPoint4 : Rubber seal on the side of the bearing exposed to contaminants and open on the other for applying lubricant
BulletPoint5 : CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
BulletPoint6 : Open on One Side
ExternallyAssignedProductIdentifier1 : 4547359351620
ExternallyAssignedProductIdentifier2 : 04547359351620
IncludedComponents : bearing
ItemDisplayWeight : 0.28 pounds
ItemName : NTN Bearing 6203LU Single Row Deep Groove Radial Ball Bearing, Contact, Normal Clearance, Steel Cage, 17 mm Bore ID, 40 mm OD, 12 mm Width, Single Seal, Open One Side
ItemPackageDimensions_Height : 1.778 centimeters
ItemPackageDimensions_Length : 4.826 centimeters
ItemPackageDimensions_Width : 4.826 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : NTN
Material : Carbon Chrome Steel
ModelNumber : NTN 6203LU
NumberOfItems : 1
PackageLevel : unit
PartNumber : 6203LU
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 625-2RS
Sealed Type: Double Sealed
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 5mm
Outer Diameter (D): 16mm
Thickness (B): 5mm
Dynamic Load Rating (Cr): 1.75kN
Static Load Rating (Cor): 0.67kN
Accuracy Class: P6 (ABEC-3)
Noise Level: Z1
Number of Pack: 10 Pcs

ProductSiteLaunchDate : 2013-06-11T04:11:52.654Z
Size : 5mmx16mmx5mm
SpecificationMet : ABEC 1
SpecificationMet1 : DIN 728
SpecificationMet2 : ISO 104
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1