Cart 2 india

Specification
Brand : NTN
BulletPoint1 : Deep groove geometry for high speeds
BulletPoint2 : Single row for supporting radial loads
BulletPoint3 : Steel cage evenly spaces balls for reduced friction, vibration and noise
BulletPoint4 : Double-lip contact rubber seal on both sides to keep lubricant in and contaminants out
BulletPoint5 : C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
ExternallyAssignedProductIdentifier : 1200106985983
ExternallyAssignedProductIdentifier1 : 4547359545906
ExternallyAssignedProductIdentifier2 : 04547359545906
ItemName : NTN Bearing 6005LLUC3 Single Row Deep Groove Radial Ball Bearing, Contact, C3 Clearance, Steel Cage, 25 mm Bore ID, 47 mm OD, 12 mm Width, Double Sealed
ItemPackageDimensions_Height : 5.7 centimeters
ItemPackageDimensions_Length : 1.8 centimeters
ItemPackageDimensions_Width : 5.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : NTN Bearing
Material : Carbon Chrome Steel
ModelNumber : NTN 6005LLUC3
NumberOfItems : 1
PartNumber : 6005LLUC3
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 16006-2RS
Sealed Type: Double Sealed
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 30mm
Outer Diameter (D): 55mm
Thickness (B): 9mm
Dynamic Load Rating (Cr): 11.2kN
Static Load Rating (Cor): 7.35kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 1 Pcs

ProductSiteLaunchDate : 2013-12-07T11:28:26.767Z
Size : 30mmx55mmx9mm
SpecificationMet : Ul
StreetDate : 2017-05-15T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1