Cart 2 india

Specification
Brand : NTN Bearing
BulletPoint1 : Deep groove geometry for high speeds
BulletPoint2 : Single row for supporting radial loads
BulletPoint3 : Steel cage evenly spaces balls for reduced friction, vibration and noise
BulletPoint4 : Open bearing for lubrication applied in place
BulletPoint5 : CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
ExternallyAssignedProductIdentifier1 : 4547359003598
ExternallyAssignedProductIdentifier2 : 04547359003598
GpsrSafetyAttestation : 1
ItemName : NTN Bearing 6001 Single Row Deep Groove Radial Ball Bearing, Normal Clearance, Steel Cage, 12 mm Bore ID, 28 mm OD, 8 mm Width, Open
ItemPackageDimensions_Height : 1.3 centimeters
ItemPackageDimensions_Length : 7.8 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : NTN Bearing
Material : Carbon Chrome Steel
ModelNumber : NTN 6001
NumberOfItems : 1
PartNumber : 6001
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 634ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 4mm
Outer Diameter (D): 16mm
Thickness (B): 5mm
Dynamic Load Rating (Cr): 1.75kN
Static Load Rating (Cor): 0.67kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 1 Pcs

ProductSiteLaunchDate : 2012-09-10T06:28:45.148Z
Size : 4mmx16mmx5mm
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 49131606