Cart 2 india

Specification
Brand : NSK
BulletPoint1 : Deep-groove geometry for high speeds and supporting both radial and axial loads
BulletPoint2 : Single-row bearing for supporting radial loads
BulletPoint3 : C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion
BulletPoint4 : Pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise
BulletPoint5 : Shields on both sides of the bearing to keep lubricant in and contaminants out
ExternallyAssignedProductIdentifier1 : 029176014574
ExternallyAssignedProductIdentifier2 : 0029176014574
ExternallyAssignedProductIdentifier3 : 00029176014574
IncludedComponents : bearings
ItemDisplayWeight : 0.21 kilograms
ItemName : NSK 6206ZZC3 Deep Groove Ball Bearing, Single Row, Double Shielded, Pressed Steel Cage, C3 Clearance, Metric, 30mm Bore, 62mm OD, 16mm Width, 11000rpm Maximum Rotational Speed, 2540lbf Static Load Capacity, 4384lbf Dynamic Load Capacity
ItemPackageDimensions_Height : 2.286 centimeters
ItemPackageDimensions_Length : 6.858 centimeters
ItemPackageDimensions_Width : 6.604 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : NSK
Material : Alloy Steel
ModelNumber : 6206ZZC3
NumberOfItems : 1
PartNumber : 6206ZZC3
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 16005ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 25mm
Outer Diameter (D): 47mm
Thickness (B): 8mm
Dynamic Load Rating (Cr): 8.85kN
Static Load Rating (Cor): 5.6kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 1 Pcs

ProductSiteLaunchDate : 2012-01-23T00:00:01-00:00
Size : 25mmx47mmx8mm
SpecificationMet : Nsk 6200
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31171500