Cart 2 india

Specification
Brand : Koyo USA
BulletPoint : Standard Diameter: 1/8" / .125 InchesMetric Diameter: 3.175mmGrade: 5Material: Si3N4 Silicon NitrideBall Weight (each): .001937 Ounces / 0.0549 GramsSilicon Nitride (Si3N4) Ceramic Balls are formed from a new material suitable for applications where high loads, high speeds and extreme temperatures are factors. Long life and the need for minimal lubrication make this material appropriate for extreme applications. Silicon nitride is a non-porous, non-magentic, non corrosive, and lighter than steel
BulletPoint1 : Accommodates both radial and axial loads
BulletPoint2 : Super finished raceways
BulletPoint3 : Inner and Outer rings hardened for extended life and wear protection
BulletPoint4 : Design features of the RD Seal reduce drag, frictional torque, and operating temperature. The RD Seal's superior closure helps to inhibit the ingress of contaminants and moisture
BulletPoint5 : Filled with Polyrex EM Grease
ExternallyAssignedProductIdentifier1 : 605790056734
ExternallyAssignedProductIdentifier2 : 0605790056734
ExternallyAssignedProductIdentifier3 : 00605790056734
ItemName : Koyo USA 6203 2RDC3 GXM Koy Ball Bearing, 17 mm Bore Size, 40 mm Outer Diameter, 1.5748" Width
ItemPackageDimensions_Height : 0.4 inches
ItemPackageDimensions_Length : 1.7 inches
ItemPackageDimensions_Width : 1.8 inches
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : Koyo Corporation of USA
Material : 52100 Steel
ModelNumber : 6203 2RDC3 GXM KOY
NumberOfItems : 1
PartNumber : 6203 2RDC3 GXM KOY
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 16006ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 30mm
Outer Diameter (D): 55mm
Thickness (B): 9mm
Dynamic Load Rating (Cr): 11.2kN
Static Load Rating (Cor): 7.35kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 1 Pcs

ProductSiteLaunchDate : 2014-02-17T00:00:01-08:00
Size : 50 Bearings
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500