SpecificationBrand : HIPICCO
BulletPoint1 : MR115-2RS Sealed Bearings,(I.D.=5mm, O.D.=11mm, Thickness=4mm);
BulletPoint2 : Precision metric miniature ball bearing, both sides rubber sealed, pre-lubricated with grease
BulletPoint3 : Made of chrome steel (GCr15), durability and resistance to under heavy loads
BulletPoint4 : Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
BulletPoint5 : Apply for electric motors to robotics, Dental Equipment, Ship Rudder Shafts, Surgical Instruments, RC Cars, RC Helicopters, RC Planes, RC Trucks, Lab Equipment, Jewelry, Hand Pieces, Anemometers, Miniature Gearboxes, Small Motors and other fields.
Color : Silver
ExternallyAssignedProductIdentifier : 8435677211046
IncludedComponents : Deep Groove Ball Bearings
ItemName : HiPicco MR115-2RS Deep Groove Ball Bearings, ID 5mm x OD 11mm x Width 4mm Miniature Bearings, Double Rubber Sealed Ball Bearing Pre-Lubricated Chrome Steel Z2 Lever 10pcs
ItemPackageDimensions_Height : 8.9 centimeters
ItemPackageDimensions_Length : 0.7 centimeters
ItemPackageDimensions_Width : 5.9 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : HiPicco
Material : Metal
Material1 : Stainless Steel
Material2 : Rubber
ModelNumber : MR115-2RS
NumberOfItems : 10
PackageLevel : unit
PartNumber : H20220603010
ProductDescription :
Description:
- MR115-2RS is a Precision Metric Miniature Ball Bearing manufactured to have both sides Rubber Sealed and is pre-lubricated with grease. Made from Chrome Steel, MR Series Miniature Ball Bearing meant for light-duty applications but despite its lightweight, can support moderate radial loads. Additionally, because of it's small size, it is suitable for installation with limited space and on thin shafts. MR Series Bearings have a smaller OD which assists in being able to be used in high speed applications.
Feature:
- Single-row, pre-lubricated, normal accuracy.
- Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
- With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
- These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
- Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selecting Guide:
- Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
- Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification:
- Model: MR115-2RS
- Seal Type: Double Sealed
- Inner Race/Outer Race Material: Chrome Steel (GCr15)
- Cage Material: Stamping Steel
- Inner Diameter (d): 5mm
- Outer Diameter (D): 11mm
- Thickness (B): 4mm
- Accuracy Class: P0 (ABEC-1)
- Noise Level: Z2
- Number of Pack: 10 Pcs
ProductSiteLaunchDate : 2023-06-05T16:17:49.809Z
Size : MR115-2RS 5x11x4mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31171500