Cart 2 india

Specification
Brand : FAG Bearings
BulletPoint1 : Deep groove geometry for high speeds and supporting both radial and axial loads
BulletPoint2 : “Medium” bearing design for average to above average radial loads and light to average axial loads
BulletPoint3 : C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
BulletPoint4 : Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
BulletPoint5 : Open bearing for lubrication applied in place
Color : silver tone
ExternallyAssignedProductIdentifier : 4012801072823
IncludedComponents : bearings
ItemDisplayWeight : 0.07 pounds
ItemName : FAG 6306-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, 30mm ID, 72mm OD, 19mm Width, 24000 rpm Maximum Rotational Speed, 3650 lbf Static Load Capacity, 6550 lbf Dynamic Load Capacity
ItemPackageDimensions_Height : 2.032 centimeters
ItemPackageDimensions_Length : 7.62 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : Schaeffler Technologies Co.
Material : Steel Cage
ModelNumber : 6306C3
NumberOfItems : 1
PackageLevel : unit
PartNumber : 6306-C3
ProductDescription : 1. This silicone O-ring is red in color, round in shape, has a durometer of 50, and is designed for use in a wide variety of sealing applications.
2. This silicone O-ring can be used across a wide temperature range from -22℉ (-30℃) to 392℉ (200℃)
3. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders.
4. This silicone O-ring has good resistance to ozone, weather, , salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. It is an ideal solution for sealing application where there are high temperatures and corrosive liquids or gases involved.
5. Used widely for mechanical sealing, pressure, gas compressor, reaction, heat exchanger, boiler, filter, automobile, electrical appliance and other fields.

Specifications:
Outside Diameter: 17mm / 0.67-inch
Inner Diameter: 12.2mm / 0.48-inch
Cross-Section Diameter: 2.4mm / 0.09-inch
Package Content: 10pcs x Silicone O-Ring
ProductSiteLaunchDate : 2013-01-29T00:00:01-00:00
Size : 12.2mmx17mmx2.4mm
SpecificationMet : Ul
SpecificationMet1 : Din 620-4
SpecificationMet2 : Din 623-1
SpecificationMet3 : Iso 281
SpecificationMet4 : Din 625-1
SpecificationMet5 : Iso 286
SpecificationMet6 : Iso 683-17
SpecificationMet7 : Din Iso 281
SpecificationMet8 : En 10139
SpecificationMet9 : Sae J403
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1