Cart 2 india

Specification
Brand : BC Precision
BulletPoint : Standard Diameter: 3/32" / .09375 InchesMetric Diameter: 2.38125mmGrade: 5Material: Si3N4 Silicon NitrideBall Weight (each): .00081863 Ounces / 0.0232 GramsSilicon Nitride (Si3N4) Ceramic Balls are formed from a new material suitable for applications where high loads, high speeds and extreme temperatures are factors. Long life and the need for minimal lubrication make this material appropriate for extreme applications. Silicon nitride is a non-porous, non-magentic, non corrosive, and lighter tha
BulletPoint1 : Model=S609ZZ (I.D.=9mm, O.D.=24mm, Thickness=7mm)
BulletPoint2 : Bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Made of 440C Stainless Steel, features with stronger rust and corrosion resistance ability
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 1040N and dynamic load rating of 2570N; Limiting Speed (Oil): 34200rpm
Color : One Color
ExternallyAssignedProductIdentifier : 8435677292687
ExternallyAssignedProductIdentifier1 : 730860457293
ExternallyAssignedProductIdentifier2 : 0730860457293
ExternallyAssignedProductIdentifier3 : 00730860457293
ItemName : 3/32" Inch Si3N4 Silicon Nitride Ceramic Ball Bearings G5-10 Bearings
ItemPackageDimensions_Height : 8.8 centimeters
ItemPackageDimensions_Length : 0.4 centimeters
ItemPackageDimensions_Width : 5.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : BC Precision
Material : Ceramic
ModelNumber : 332BCSI6
NumberOfItems : 10
PartNumber : BC332SI-10
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: S609ZZ
Seal Type: Double Shielded
Inner Race/Outer Race Material: 440C Stainless Steel (9Cr18)
Cage Material: 304 Stainless Steel (0Cr18Ni9)
Inner Diameter (d): 9mm
Outer Diameter (D): 24mm
Thickness (B): 7mm
Dynamic Load Rating (Cr): 2570N
Static Load Rating (Cor): 1040N
Limiting Speed (Oil): 34200rpm
Accuracy Class: P0 (ABEC1)
Noise Level: Z2
Number of Pack: 1 pcs
ProductSiteLaunchDate : 2016-01-22T01:48:44.918Z
Size : 10 Bearings
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 31171500