Cart 2 india

Specification
Brand : Greensen
BulletPoint1 : [Comprehensive Data] Provides key information including alarm status, temperature statistics (in ℃/℉), and more for detailed monitoring.
BulletPoint2 : [Plug and Play] No cable or reader needed, simply connect via usb to quickly download data to pcs.
BulletPoint3 : [Ample Storage Capacity] With a capacity of up to 10,000 temperature points, ensuring extensive data collection for monitoring purposes.
BulletPoint4 : [Easy Configuration] Super quick and easy to configure, no software installation required for hassle- setup.
BulletPoint5 : [Accurate Sensor Technology] Adopts light and temperature sensor with higher accuracy, ensuring precise temperature recordings.
ItemName : USB Temperature Data Logger, Single use Light and Temperature Sensor 10000 Points, for Cold Chain Monitoring PDF Report
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : industrial-data-loggers
Manufacturer : Greensen
ModelName : Greensentgoz5cevka
ModelNumber : Greensentgoz5cevka
NumberOfItems : 1
PartNumber : Greensentgoz5cevka
ProductDescription : Specifications:
Color: As shown in the picture
How to use: single use
Accuracy: ±0.5°C (-20°C~+40°C); out of range, ±1°C
Data capacity: 10000
Alarm temperature range: 8°C (46.4°F)
Delayed record: 30 minutes
Working environment temperature: -30 ° C ~ +70 ° C
Power supply: 1 x 150mAh (Built-in)
Equipment storage environment: recommended humidity 20 to 60% RH, temperature 10 to 50 °C

Instructions for use:
1. Press and hold the Start/Stop button for more than 3 seconds, the OK indicator will be on for 3 seconds, indicating that the device starts recording, and then you can place the device in the environment you need to monitor.
2. During the recording process, the device will automatically light every 10s. If the normal indicator (green light) is lit every 10s, it means that the device is not over temperature during the recording process. If the alarm indicator (ie red light) is bright every 10s Once, it indicates that over-temperature has occurred during the recording process. Note: As long as over-temperature is found during the recording process, the green light will no longer illuminate.
3. Press and hold the Start/Stop button for more than 3s, the alarm indicator (ie red light) will be on for 3s, indicating that the device stops recording. The recording will also stop automatically when the device is full. After the device stops recording, it will not automatically flash. If the device is over-temperature during recording, press the Start/Stop button. If the normal indicator (green light) is on, it indicates that the temperature is not over-recorded during the recording; if the alarm is When the indicator light (ie red light) is on, it indicates that the temperature is over temperature during recording.


Package List:
1 x Temperature Logger
ProductSiteLaunchDate : 2024-11-25T12:01:20.218Z
UnspscCode : 53120000