Cart 2 india

Specification
Brand : SparkFun
BulletPoint1 : The SparkFun DataLogger IoT comes preprogrammed to automatically log movement, GPS, and various pressure, humidity, and distance sensors.
BulletPoint2 : All without writing a single line of code! The DataLogger automatically detects, configures, and logs Qwiic sensors. It was specifically designed for users who just need to capture a lot of data to a CSV or JSON file and get back to their more extensive project.
BulletPoint3 : Features: Ports: 1x USB type C, 1x JST style connector for LiPo battery, 2x Qwiic enabled I2C, 1x microSD socket, Support for 4-bit SDIO and microSD cards formatted to FAT32, LEDs, Charge (CHG) Status (STAT) 1-Wire B3DQ3BRG Addressable RGB.
BulletPoint4 : This DataLogger IoT omits a built-in IMU. This version still supports auto-detection and logging of over a dozen sensors and GNSS receivers. Power up the DataLogger IoT, configure the board to record readings from supported devices, and begin logging! Data can be time-stamped when the time is synced to NTP, GNSS, or RTC.
BulletPoint5 : The DataLogger IoT automatically scans, detects, configures, and logs various Qwiic sensors plugged into the board (No soldering! No programming!).
ExternallyAssignedProductIdentifier1 : 0845156013630
ExternallyAssignedProductIdentifier2 : 845156013630
ItemName : SparkFun DataLogger IoT, ESP32-WROOM-32E Module, MAX17048 LiPo Fuel Gauge, Dimensions: 1.66in. x 2.00in.
ItemPackageDimensions_Height : 55 millimeters
ItemPackageDimensions_Length : 45 millimeters
ItemPackageDimensions_Width : 10 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-data-loggers
Manufacturer : SparkFun Electronics
Material : Copper
NumberOfItems : 1
PartNumber : DEV-22462
ProductDescription : The SparkFun DataLogger IoT is a data logger that comes preprogrammed to automatically log GPS and various pressure, humidity, and distance sensors. All without writing a single line of code! The DataLogger automatically detects, configures, and logs Qwiic sensors. It was specifically designed for users who just need to capture a lot of data to a CSV or JSON file and get back to their more extensive project. Save the data to a microSD card or send it wirelessly to your preferred Internet of Things (IoT) service! This DataLogger IoT omits a built-in IMU. This version still supports auto-detection and logging of over a dozen sensors and GNSS receivers. Power up the DataLogger IoT, configure the board to record readings from supported devices, and begin logging! Data can be time-stamped when the time is synced to NTP, GNSS, or RTC.
The DataLogger IoT is highly configurable over an easy-to-use serial interface. Simply plug in a USB-C cable and open a serial terminal at 115200 baud. The logging output is automatically streamed to the terminal and the microSD card. Pressing any key in the terminal window will open the configuration menu. The DataLogger IoT automatically scans, detects, configures, and logs various Qwiic sensors plugged into the board (No soldering! No programming!).
ProductSiteLaunchDate : 2023-10-03T22:24:08.548Z
SupplierDeclaredDgHzRegulation : not_applicable