Cart 2 india

Specification
Brand : AYNEFY
BulletPoint1 : [IDEAL FOR ENSURING PRODUCT QUALITY] during transportation and storage
BulletPoint2 : [EASY REPORT GENERATION] by directly connecting to your computer via built-in USB connector
BulletPoint3 : [REAL-TIME TEMPERATURE INDICATION] every 10 seconds during recording
BulletPoint4 : [ OVER-TEMPERATURE ALERTS] signaled by the red alarm indicator light
BulletPoint5 : [CONVENIENT STOP/START FUNCTION] for easy control of recording process
ItemName : Single Use Temperature Data Logger USB Recorder for FoodDrugs Monitoring, 10000 Data Capacity (TempU05)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : industrial-data-loggers
Manufacturer : AYNEFY
ModelName : Marhynchuswpncob2rmd-11
ModelNumber : AYNEFYvqu0b6rz7d-11
PartNumber : AYNEFYvqu0b6rz7d-11
ProductDescription : 1. Widely used for monitoring food, drugs, chemical products and other transport and storage process.
2. After the record ends, you can directly insert the computer to get PDF report.
3. Built in USB connector, directly connect PC or cellphone, no cable or reader required.
4. With high ±0.5°C and high sensitivity.
5. It has small and compact size, easy to carry.
6. Wide range of temperature measurement, it can store 10,000 data.

Specification:
Condition: Brand New
Item Type: Temperature Recorder
Material: Plastic
Color: As shown in the picture
Size: Approx.67x28mm/2.64x1.1in(L x W)
Weight: Approx.13g/0.5oz
Type: Single use
Log Interval: 10 minutes
Accuracy: ±0.5℃(-20℃~+40℃)
Out of Range: ±1℃
Data Capacity: 10000
Alarm Temperature Range: 8℃( 46.4℉)
Start Delay: 30minutes
Working Environment Temperature: -30℃~+60℃
Battery: 210mAh Battery(Included)
Instructions:
1. Press and hold the “Start/Stop” button for more than 3s, the “OK” indicator will be on for 3S, indicating that the device starts recording, and then you can place the device in the environment you need to monitor.
2. During the recording process, the device will automatically light every 10s. If the normal indicator light (ie green light) is lit every 10s, it means that the device is not over temperature during the recording process. If the alarm indicator light (ie red light) is illuminated every 10 seconds, Explain that over-temperature has occurred during the recording process. Note: As long as over-temperature is found during the recording process, the green light will no longer illuminate.
3. Press and hold the “Start/Stop” button for more than 3s, the alarm indicator (ie red light) will be on for 3s, indicating that the device stops recording. The recording will also stop automatically when the device is full. After the device stops
ProductSiteLaunchDate : 2024-11-27T12:46:38.315Z
Size : TempU05
UnspscCode : 41113700