Specification Brand : SKF BulletPoint1 : SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads BulletPoint2 : CN (normal) radial clearance for applications where thermal expansion is not a factor BulletPoint3 : Single row roller bearing for high radial loads with low friction BulletPoint4 : Removable inner ring in open bearing allows for lubrication in place BulletPoint5 : Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages Color : One Color ExternallyAssignedProductIdentifier : 5028889636269 ExternallyAssignedProductIdentifier1 : 7316577031228 ExternallyAssignedProductIdentifier2 : 07316577031228 IncludedComponents : AXK2035+2ASx4 ItemName : SKF NUP 214 ECP Cylindrical Roller Bearing, Single Row, Two Piece, Removable Inner Ring, Straight Bore, High Capacity, Normal Clearance, Polyamide/Nylon Cage, Metric, 70mm Bore, 125mm OD, 24mm Width ItemPackageDimensions_Height : 4.4 centimeters ItemPackageDimensions_Length : 14.5 centimeters ItemPackageDimensions_Width : 14.5 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : cylindrical-roller-bearings Manufacturer : SKF Material : Nylon ModelNumber : NUP 214 ECP NumberOfItems : 1 PackageLevel : unit PartNumber : NUP 214 ECP ProductDescription : Specification: Model: RC081208 Drawn Cup Material: ST14 Steel Needle Roller Material: Chromium Steel (GCr15) Bore Diameter (Fw): 12.7mm / 1/2" Outside Diameter (D): 19.05mm / 3/4" Width: 12.7mm / 1/2" Torque: 7.9N*m Number of Pack: 1 Pcs
Description: -Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness. -These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing. -Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore. -For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others. -NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation.