Cart 2 india

Specification
Brand : ASHATA
BulletPoint1 : SPEEDOMETER: Aluminum Alloy Bezel Retro Speedometer with Crystal Acrylic, Looks Great on Your bike. Big in Size, Easy to Read.(Note: Only the Computer, others are just Photography Props)
BulletPoint2 : APPLICABLE: Speed in RPM Odometer 24-27.5 Inch Wheels . for 26/27.5/28/29 inch Road Bike, Mountain Bike, Folding and Old Exercise . (Note: This speedometer may not be compatible with some electric assist bikes, nor will it fit quick release wheels with speeds over 38 MPH. It does not fit small size bikes with rising handlebars (not for forks) or with disc breaks)
BulletPoint3 : EASY TO INSTALL: Simple installation takes only a few minutes. Mount the meter on the handlebars, Attach the gears on the axle of the front wheel and connect them with a cable. No Need for Batteries and Adjustment Setting.
BulletPoint4 : AUTO RESET: There's No Reset Button. As a Mechanical Speedo, The Odometer Will Turn to 0 When the Mileage Reaches 9999.9 to Start Over.
BulletPoint5 : METRIC MEASUREMENT: The Speedometer is in KPH Which is the Most Widely Used Measurement, Not in MPH. A Kilometer is 0.62 Mile. When the Speedometer Needle Indicates 30 KPH, the Speed Is Approximately 18.6 Miles Per Hour.
Color : Black
ExternallyAssignedProductIdentifier : 7500706210930
HumanInterfaceInput : buttons
IncludedComponents : Bike Odometers
InternationalProtectionRating : IP54
ItemName : ASHATA Computer, Odometer and Speedometer Waterproof Cycling Computer with LCD Display for 26/27.5/28/29 inch Bikes
ItemPackageDimensions_Height : 11 centimeters
ItemPackageDimensions_Length : 7.6 centimeters
ItemPackageDimensions_Width : 9.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : cyclocomputers
Manufacturer : ASHATA
Material : Acrylic,Aluminum
ModelNumber : EBU827gevytqknfr552
MountingType : Handlebar Mount
NumberOfItems : 1
PartNumber : EBU827gevytqknfr552
ProductDescription : Specification:
Condition: Brand New
Material: Aluminum Alloy
Color: Black
Size: Approx. 11 * 8 * 8 cm / 4.3 * 3.1 * 3.1 in
Weight: Approx. 333 g
Installation Conditions: A quick release lever or a large front wheel clearance is required for installation.

Package List:
1 * Computer

Installation Instructions:
1. Attach the speedometer with the large black plastic screw to the metal mounting bracket by aligning it with the two indentations. Make sure the speedometer is not upside down. (Do not remove the two screws at the bottom of the speedometer)
2. Then attach the speedometer with mounting bracket attached to the middle RIGHT side of your handlebar of the stem.
3. Loosen your front wheel, unscrew the quick lease, insert the grey round plastic part INSIDE the suspension forks on the RIGHT side by using the two supplied washers. The metal bracket attached to the round plastic part faces towards the spokes. Reattach the front wheel.
4. Attach the cable to the speedometer and into the grey round plastic part now attached to the front wheel at the RIGHT side inside the brackets. The cable is just long enough to reach from the speedometer to the plastic part attached to the front wheel in a straight line down.
ProductSiteLaunchDate : 2022-04-18T00:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25191800