SpecificationBrand : WnewTools
BulletPoint : Adhesive backed, plastic strip goes over existing caulk
BulletPoint1 : K-0242 (General Purpose / medium strength thread locking anaerobic) is a one-component, thixotropic medium viscosity, medium strength, general purpose anaerobic thread locking anaerobic adhesive. The anaerobic thread locking between close fitting metal surfaces and cured with air isolation. The anaerobic thread locking hand tools available demolished.
BulletPoint2 : Application: The anaerobic thread locking to avoid loosening and leakage of threaded fasteners. For M6-M36 thread locking and sealing. Prevent thread corrosion.
BulletPoint3 : Typical uses: screw locking.
BulletPoint4 : Specification:
BulletPoint5 : Base chemical composition: methyl methacrylate
Color : White
CompatibleMaterial : Leather
ExternallyAssignedProductIdentifier : 7449153676633
ExternallyAssignedProductIdentifier1 : 0769902949502
ExternallyAssignedProductIdentifier2 : 769902949502
IncludedComponents : inc
ItemForm : Gel
ItemForm1 : Paste
ItemForm2 : Strip
ItemName : K-0242 Anaerobic Adhesive Metal Thread Locking Glue Thread Sealant Anti-rust Glue Removable 50ML M6-M36
ItemPackageDimensions_Height : 15 centimeters
ItemPackageDimensions_Length : 22 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : cyanoacrylate-adhesives
ItemVolume : 50 milliliters
Manufacturer : Wnew
Material : Rubber
ModelName : .....
ModelNumber : PANN1723978
NumberOfItems : 1
NumberOfPieces : 12
PartNumber : PANN1723978
ProductDescription :
Features:
Application:The anaerobic thread locking to avoid loosening and leakage of threaded fasteners. For M6-M36 thread locking and sealing. Prevent thread corrosion.
Specification:
Base chemical composition: methyl methacrylate
Appearance: blue viscous liquid
Viscosity (mPa.s): 1000-3000
Specific Gravity: 1.05
Flash point (° C):> 108
Maximum fill the gap (mm): 0.13
Room temperature curing time (min): 20
After curing properties:
Full cure time at room temperature (hr): 24
Destruction of torque (Nm): 12
The average removal torque (Nm): 7
Operating Temperature (° C): -54 ~ 149
Instructions:
Painted surfaces should be clean, dry and no oil.
Bolts painted in sufficient quantity to fill all engaged threads, a thin layer of the product results in a 0.05 mm or less work best.
For large thread sizes, the larger the gap will affect cure speed and strength of the product. This product will reduce the friction force (torque tension ratio) assembly generated. Need to be fastened to the threaded applications critical value, the need to determine in advance a good ratio.
Caution:
The anaerobic thread locking should not be used on plastic parts; in order to avoid contamination of the original glue, do not have poured the glue back to the original packaging.
Safety Precautions:
The anaerobic thread locking containing methyl acrylate, skin and eye irritation. If skin contact, immediately wash with water; If contact with eyes, rinse immediately with water and go to the hospital for treatment.
Packing: K-0242 with 50ml plastic bottles.
Storage conditions:
in the temperature range of 15 ~ 28 ° C in a cool, dry place sealed, shelf life of up to 12 months.
Package Included:
1 x K-0242 Anaerobic Adhesive
ProductSiteLaunchDate : 2023-11-21T16:07:19.277Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation1 : Hardwood
SurfaceRecommendation2 : Tile
UnitCount : 1
WaterResistanceLevel : waterproof