Cart 2 india

Specification
Brand : Qqmora
BulletPoint1 : Two Isolation Chambers: The generator actuator is designed with two isolation chambers. The upper chamber is wetted with oil and contains connections to the fuel rack and an optional manual shut off mechanism. The sealed lower chamber contains the electromagnetic component.
BulletPoint2 : Wide Use: The external actuator can meet most of the requirements of industry, mining, vehicles and ships, enterprises and civil life, and is especially suitable for engineering generator sets for day and night open air operations such as roads, bridges and infrastructure.
BulletPoint3 : Excellent Structural Design: The electric actuator has an excellent structural design that does not allow magnetic powder or other oil to interfere with operation and requires no maintenance.
BulletPoint4 : Control of Fuel Pumps: The generator actuator is used for direct mounting to an inline fuel injection pump with a right hand rack in place of a mechanical governor and can control fuel pumps for up to 8 cylinders.
BulletPoint5 : External Fuel Cutoff Lever: The electric actuator provides an external fuel cutoff lever to manually override the actuator controls. An adjusting internal maximum fuel limit is also provided.
ItemName : External Throttle Actuator, 20G Impulse Generator Electric Actuator 1.3N High Torsion Stable Adjusting 23mm Stroke Alloy Steel for Boats (DC24V)
ItemPackageDimensions_Height : 18 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 18 centimeters
ItemTypeKeyword : cyanoacrylate-adhesives
Manufacturer : Qqmora
ModelName : Qqmoranh8r4i5gx6-12
ModelNumber : Qqmoranh8r4i5gx6-12
NumberOfItems : 1
PartNumber : Qqmoranh8r4i5gx6-12
ProductDescription : 1. Control of Fuel Pumps: The generator actuator is used for direct mounting to an inline fuel injection pump with a right hand rack in place of a mechanical governor and can control fuel pumps for up to 8 cylinders.
2. Two Isolation Chambers: The generator actuator is designed with two isolation chambers. The upper chamber is wetted with oil and contains connections to the fuel rack and an optional manual shut off mechanism. The sealed lower chamber contains the electromagnetic component.
3. Excellent Structural Design: The electric actuator has an excellent structural design that does not allow magnetic powder or other oil to interfere with operation and requires no maintenance.
4. External Fuel Cutoff Lever: The electric actuator provides an external fuel cutoff lever to manually override the actuator controls. An adjusting internal maximum fuel limit is also provided.
5. Wide Use: The external actuator can meet most of the requirements of industry, mining, vehicles and ships, enterprises and civil life, and is especially suitable for engineering generator sets for day and night open air operations such as roads, bridges and infrastructure.

Spec:
Item Type: Generator Actuator
Material: Alloy Steel
Operating Current: 0-3A
Stroke: Approx. 23mm / 0.9in
High Torsion: 1.3N
Impulse: 20G
Vibration: Less Than 500Hz
Ambient Temperature: -45 - +95℃
Relative Humidity: Less Than 95%
1. Remove the built in actuator from the PT pump and replace the head and cover plate with an o and M6 .
2. Check that the throttle shaft on the front of the PT pump is not bent by the impact.
3. When the PT pump was originally using the built in actuator, the throttle lever outside was fixed in the large throttle position (left), loosen the throttle lever stop screws on the left and right sides, and toggle the shaft to see if it is stuck or loose. Adjust the right screw to idle speed, about 650-750 rpm, and lock it tight. Adjust the
ProductSiteLaunchDate : 2023-08-20T17:09:50.546Z
Size : DC24V
UnitCount : 1