CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit, Ear Boot Tie Pliers, Car Band Tool Kit, Hose Axle Plier CV Clamp Tool for Auto ATV UTV

Customer rating 4.4 stars

Imported from USA | Ships in 10 working days

5% additional discount on UPI | Cash On Delivery available

1

₹11050 -33% ₹7400/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Tabazy
BulletPoint1 : Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps.
BulletPoint2 : CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. )
BulletPoint3 : Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage.
BulletPoint4 : Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width & 0.023" (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354" (9mm) in width & 0.031" (0.8mm) in thickness.
BulletPoint5 : Package Included: 1Pcs Ear Clamps Pliers, 1Pcs CV Joint Banding Tool with Cutter, 4Pcs Small CV Boot Clamps, 4Pcs Large CV Boot Clamps are included in this kit, same as the pictures.
Color : Red
ExternallyAssignedProductIdentifier : 6974676371563
ExternallyAssignedProductIdentifier1 : 0769256679667
ExternallyAssignedProductIdentifier2 : 769256679667
ExternallyAssignedProductIdentifier3 : 0792117036484
ExternallyAssignedProductIdentifier4 : 0757686841167
GpsrSafetyAttestation : 1
IncludedComponents : Plier, Clamps Set
ItemName : CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit, Ear Boot Tie Pliers, Car Band Tool Kit, Hose Axle Plier CV Clamp Tool for Auto ATV UTV
ItemPackageDimensions_Height : 28.6004 centimeters
ItemPackageDimensions_Length : 4.4958 centimeters
ItemPackageDimensions_Width : 19.7104 centimeters
ItemPackageQuantity : 20
ItemTypeKeyword : automotive-constant-velocity-boot-tools
Manufacturer : Tabazy
Material : Stainless Steel
Material1 : Stainless Steel
Material2 : Chrome Vanadium Steel
Material3 : Alloy Steel
ModelName : Pliers and Clamps Set
ModelNumber : AVC 48/120
NumberOfItems : 1
PartNumber : AVC 48/120
ProductDescription : Ear Type CV Joint Boot Clamp Pliers
CV Boot Clamp Pliers Tool for Ear-Type Clamp Crimping or Removal on most car such as VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on ear-type constant velocity joint boot clamps.
Easy to use
Step 1: Crimp the clamp
Step 2: Push down on the crimp to lock into place.

CV Joint Banding Tool with Cutter
Ideal tool for use when installing and tightening the 'band-it' or strap style clamps found on CV joint boots, steering gear boots, or hoses.
Step 1: Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip tool nose and through winding mandrel slot.
Step 2: Tighten the band by turning the handle on the tool; use a socket or wrench on the handle to torque the band to OE specifications.
Step 3: Cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Step 4: To complete clamping, fold down the remaining tail of the band into the clip and secure it by tapping down the ears of the clip.

Ear Type CV Joint Boot Bands Drive Axle Shaft Crimp Clamps Features:
Made of high quality 304 stainless steel.
Have good corrosion resistance, strong rust resistance, hard and sturdy.
Used on drive & CV Axle.
Work well with your cv boot kit such as atv's and utv's cv boots. A perfect replacement for your loose or broken cv boot clamp.

Package Included:
1Pcs Ear Clamps Pliers
1Pcs CV Joint Banding Tool with Cutter
4Pcs Small CV Boot Clamps
4Pcs Large CV Boot Clamps

We focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
ProductSiteLaunchDate : 2021-12-10T08:44:59.027Z
Size : Cut-off Pliers
SpecificUsesForProduct : hose_clamp
Style : Adjustable
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 21
UnspscCode : 27112100

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
5
4*
5
3*
1
2*
0
1*
0

Read all 11 customer reviews

Just what I needed and more.

Great choice for daily use.

This deserves more than 5 stars.

Good product with reliable performance.

Nice features and easy to handle.

Five stars all the way.

One of the best things IÕve ever bought.

Good product with reliable performance.

Will be purchasing again soon.

Meets basic needs, not exceptional.

Reliable and efficient.

Have an opinion on this page? Let's hear it.