Cart 2 india

Specification
Brand : Pferd
BulletPoint1 : CAST cut
BulletPoint2 : 1/4'' shank diameter
BulletPoint3 : 1/2'' x 1'' bur diameter x length
BulletPoint4 : 2-3/4'' length
BulletPoint5 : Quantity - 1 per pack
Color : Silver
ConstructionType : Coated
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 097758247290
ExternallyAssignedProductIdentifier2 : 0097758247290
ExternallyAssignedProductIdentifier3 : 00097758247290
IncludedComponents : Alfa Tools
IndustryStandardIdentifier : SF 3
ItemName : Carbide Bur - Tree Shape, CAST Cut 1/2" x 1" x 1/4" Shank - SF-5
ItemPackageDimensions_Height : 0.276 inches
ItemPackageDimensions_Length : 4.016 inches
ItemPackageDimensions_Width : 0.866 inches
ItemPackageQuantity : 1
ItemShape : Sf-5
ItemShape1 : Round
ItemShape2 : Tree
ItemTypeKeyword : cutting-burs
Manufacturer : PFERD
Material : tungsten carbide
MeasurementSystem : Metric
ModelName : SF-5
ModelNumber : 24729
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 24729
ProductDescription : Carbide Rotary Burrs are used for cutting, shaping, grinding and for the removal of sharp edges, burrs and excess material (deburring). Tungsten Carbide burrs can be used on most hard materials: metals including steel, aluminum and cast iron, all types of stone, ceramic, porcelain, hard wood, acrylics, fiberglass and reinforced plastics. Ideally carbide burrs are used in Air Tools i.e Die Grinders, Pneumatic rotary tools and high speed engravers. Carbide burrs commonly come in three cuts; single cut, double cut & diamond cut; we offer DOUBLE CUT. Double cut or cross cut carbide burrs tend to be used on ferrous and non ferrous metals, aluminum, soft steel and also for all non-metal materials such as stone, plastics, hard wood and ceramic. Double cut or cross cut (2 flutes cut across each other) will leave a slightly smoother finish than single cut due to producing smaller chips as they cut away the material. Use for medium stock removal, deburring, finishing and cleaning. A double cut carbide burr is the most popular cut and will see you through most applications. Making a decision on what shape to use will depend on the profile or cut you are looking to achieve. These different shaped burs will get into many a nook and cranny and produce some interesting profiles. The shape if the burr is in the product name i.e. SD, SC SE. OVAL/EGG SHAPE (SE) - Use channel work and shaping. The speed at which you use your carbide bur in your rotary tool will depend on the material you're using it on and the contour being produced but it's safe to say you do not need to exceed speeds of 35,000 RPM. If the burs are chipping easily this could be due to the speed being too slow. However, it's ideal to start the bur off slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burs.
ProductSiteLaunchDate : 2017-10-21T08:00:01.000Z
StreetDate : 2017-10-21T00:00:01Z
Style : Tree bur with radius end – Shape F
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27110000