Cart 2 india

Specification
Brand : Loulesy
BulletPoint1 : Input:0-1000A AC
BulletPoint10 : Load Capacity: 2 times current continuous
BulletPoint11 : Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power
BulletPoint12 : Power Consumption: less than 0.3 VA
BulletPoint13 : Capacity Max:0-2000A AC (Customerized,contact operator if you need other input ranges,e.g.Input:0-550A)
BulletPoint14 : Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation
BulletPoint2 : Output:0-10V DC
BulletPoint3 : Power Supply:24V DC +/-15%(if you need 15V or 12V,contact us)
BulletPoint4 : Hole Diameter:31mm
BulletPoint5 : Dimension:106*24*60mm (L*W*H)
BulletPoint6 : Accurracy: 0.5%
BulletPoint7 : Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting
BulletPoint8 : Impulse Voltage:5KV(peak value),1.2/50uS
BulletPoint9 : Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation
CurrentRating : 1000 amps
ExternallyAssignedProductIdentifier : 6933076219806
ItemName : Loulesy AC Current Transmitter Transducer Transformer Sensor 0-1000A AC Output 0-10V DC
ItemPackageDimensions_Height : 11.2 centimeters
ItemPackageDimensions_Length : 3.4 centimeters
ItemPackageDimensions_Width : 10.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : current-transducers
Manufacturer : Loulesy
Material : Enclosure Material:UL 94 V - 0 flammability rated,ABS plastic housing
MinimumFrequency : 50 hertz
ModelNumber : CR4860-150
MountingType : Rail Mount
NumberOfItems : 1
PartNumber : AS1B1K-SD-10V
ProductDescription : GY-MAX30100 Low Power Heart Rate Sensor Board Module for Oximetry Solution SpO2 Replace concentration sensor
Features:
brand new and
A measures the saturation in the bloodstream. Since blood saturation can reflect early problems such as heart and lungs, this reading is very useful as a general health monitoring metric.Its working principle is based on the light-absorbing properties of hemoglobin in the blood. Oxyhemoglobin absorbs more light than red light, while deoxyhemoglobin absorbs more red light than light. Therefore, the red and LEDs in the alternately emit light, and the photodiodes receive the light that is not absorbed. The ratio of red and light received by the photodiode is used to calculate the percentage of in the blood. According to the pulsatile nature of the arterial blood flow, the rate and intensity are also determined and displayed during the measurement.
Optical sensor: and red LED combined with photodetector.
Measures absorbance of pulsing blood.
I2C interface INT pin.
3.3V-5V power supply.

Specifications:
Material: ABS
Length: approx. 3cm/1.18in

Package Includes:
1 x Heart Rate Concentration Sensor

Note:
No retail package.
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
ProductSiteLaunchDate : 2024-04-14T13:36:32.707Z
Size : 0-150 VAC Input Range
UnitCount : 1
UnspscCode : 60141000