Cart 2 india

Specification
Brand : LIVISN
BulletPoint1 : Voltage to current module, can 0-5V voltage conversion to 0-20mA current signal output, by adjusting the voltage to adjust the size of the current.
BulletPoint2 : The module is small and easy to use in different places.
BulletPoint3 : Using single-chip embedded technology.
BulletPoint4 : Implement the industry standard voltage (0-5V) into an industry standard current (0-10mA, 4-20mA).Drive capability MAX15mA, linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.
BulletPoint5 : Easy to operate, can be fine-tuned by potentiometer.
Color : Defult
CurrentRating : 15 amps
CurrentRating1 : 20 amps
CurrentRating2 : 0.2 amps
ExternallyAssignedProductIdentifier1 : 0781621046577
ExternallyAssignedProductIdentifier2 : 781621046577
FabricType : Abs Shell
IncludedComponents : inc
ItemName : LIVISN Voltage to Current Module 0-5V Voltage Conversion to 0-20mA Current (0-5V to 0-20MA)
ItemPackageDimensions_Height : 15.494 centimeters
ItemPackageDimensions_Length : 1.4986 centimeters
ItemPackageDimensions_Width : 10.6934 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : current-transducers
Manufacturer : LIVISN
Material : Copper
MaximumFrequency : 60 hertz
MinimumFrequency : 50 hertz
ModelName : Keensoqdn3756g1u
ModelNumber : Keensoqdn3756g1u
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Voltage to Current Module
PowerSourceType : Powersource
ProductDescription : Using single-chip embedded technology.
Implement the industry standard voltage (0-5V) into an industry standard current (0-10mA, 4-20mA).
Drive capability MAX15mA, linear output, output signal can be directly connected to the AD converter.
Can be connected with a microcontroller with AD function.
Easy to operate, can be fine-tuned by potentiometer.
Module operating voltage: DC 10V-30V.

Pin Description:
VCC: Operating power supply 10V-30V.
GND: working power ground.
VIN: Input voltage 0-5V.
GND: Input voltage ground wire.
OUT: Output current 0-20mA.
GND: Output ground.

Instructions:
The working voltage connected to VCC and GND, can not be reversed, so as not to damage the control panel and components.
In the VIN terminal control voltage, the range is 0-5V, there is a corresponding output at the output current.
The correspondence between voltage and current can be fine-tuned by adjusting the potentiometer.

Package Included:
1* Voltage To Current Module

ProductSiteLaunchDate : 2019-11-28T08:00:00.000Z
Size : 0-5V TO 0-20MA
Style : #N/A
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39121000