Cart 2 india

Specification
Brand : Walfront
BulletPoint1 : Good Quality Is Trustworthy: 100% brand new and high-quality
BulletPoint10 : Dimension:106*24*60mm (L*W*H)
BulletPoint11 : Accurracy: 0.5%
BulletPoint12 : Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting
BulletPoint13 : Impulse Voltage:5KV(peak value),1.2/50uS
BulletPoint14 : Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation
BulletPoint2 : Wide Measurement Range: The measuring range is 0-100mA which is suitable for most scenarios
BulletPoint3 : Accurate Reading: High accuracy,the resolution ratio is as as 0.1A and the accuracy grade is ±3.0%FS
BulletPoint4 : Strong Anti-Interference Ability: High sensitivity and few interference was generated if outer electric field is near
BulletPoint5 : & Rest Assured: High dielectric strength,more safety and let you rest assured
BulletPoint6 : Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation
BulletPoint7 : Output:4-20mA DC
BulletPoint8 : Power Supply:24V DC +/-15%(if you need 15V or 12V,contact us)
BulletPoint9 : Hole Diameter:31mm
ExternallyAssignedProductIdentifier : 6440267871489
FinishType : Finish
IncludedComponents : inc
ItemName : ETCR010KD Opening Closing Type Current Sensor Leakage Sensor Current Detective
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : open-loop-current-sensors
Manufacturer : Walfront
Material : Material
NumberOfItems : 1
PartNumber : Walfront8wof0b3e9m
PowerSourceType : PowerSource
ProductDescription : Specification:
Detection mode: open-and-close CT, on-line installation is particularly convenient.
Power source: 9VDC ± 1VDC (or other power supply: ± 12VDC ± 1VDC or ± 5VDC)
Working current: 20mA
The opening and closing dimension: 10 mm (the core can be pierced through a wire of less than 10 mm)
Quantity: 0.0mA ~ 100mA
DC Discriminant power: 0.1 mA
DC Accuracy level: ± 3.0% FS (23 ℃ ± 2 ℃,70% RH below, conductor in the center of clamp)
Turn ratio: 1:800
output: 25mV/ 1mA, that is,0 ~ 100mA corresponding output 0 ~ 2.5V (± 12VDC power supply: 50mV/ 1mA)
Response speed: 2 times per second
Output line:
head brown line _ power input is positive
Yellow line _ alarm control end (high potential light)
Blue Line _ Output is positive
Black line _ common ground end (power input negative and output negative, can be shorted with outer )
Output line length: 100mm
Geomagnetic interference: about 3mA
The position of the conductor at the center of the opening and closing opening Line voltage DC 600 V below line test
Working temperature and humidity: -10 ℃ ~ 45 ℃
Under 80% rh Storage temperature and humidity: -10 ℃ ~ 60 ℃
Under 70% rh Insulation strength: AC 2 kV/ rms (between core and shell)

Package List:
1*Main Unit
1*Users Manual

Note:
1. As different computers display colors differently, the color of the actual item may vary slightly from the images.
2. Please allow 1-3mm differs due to manual measurement.

ProductSiteLaunchDate : 2019-07-18T03:31:30.865Z
SupplierDeclaredDgHzRegulation : not_applicable