Cart 2 india

Specification
Brand : Atnsinc
BulletPoint1 : INA219 module is an I2C interface with a drift, bi-directional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp.
BulletPoint2 : INA219 I2C Bi-directional DC Current Power Supply Sensor, Working Voltage 3~5V; Footprint: SOT23
BulletPoint3 : INA219 module small size, low cost, high accuracy. It not only can monitor the voltage drop across a shunt resistor on the sensing shunt supply voltage, but also computing power.
BulletPoint4 : INA219 can be achieved within the maximum error accuracy of +1% from -40° C to 85° C temperature range, the maximum offset is 100 uV. The high-precision products combine the advantages of 12-bit resolution. This module can be sensed bus voltage range is 0 V to +26 V.
BulletPoint5 : Appliaction:The module is used for I2C port zero drift / bidirectional current / power monitoring sensor module. The device is available in a SOT23 package, providing a small digital current sensing servers, laptops, power supplies, battery management and automotive and telecommunications equipment, low-cost solutions.
CircuitBreakerType : Standard
CircuitType : parallel
Color : Blue
CompatibleDevices : Raspberry Pi, Arduino
ConnectivityProtocol : X-10
ConnectivityTechnology : GPIO
ConnectorType : 3.5mm Audio Jack
ControlMethod : touch
CurrentRating : 50 amps
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 701715460393
ExternallyAssignedProductIdentifier2 : 0701715460393
GpsrSafetyAttestation : 1
IncludedComponents : others
InternationalProtectionRating : IP65
ItemName : 4Pcs INA219 I2C Bi-Directional DC Current Power Supply Sensor Breakout Board Module I2C IIC Interface
ItemPackageDimensions_Height : 8.4074 centimeters
ItemPackageDimensions_Length : 1.4986 centimeters
ItemPackageDimensions_Width : 7.0104 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-current-sensors
Manufacturer : Atnsinc
Material : copper
MaximumFrequency : 1 KHz
MaximumSupplyVoltage : 5 volts
MeasurementAccuracy : 0.1%
MeasuringRange : 0 - 36 V
MinimumFrequency : 50 hertz
ModelName : UMLIFE
ModelNumber : ACS712 30A Current Sensor
MountingType : Wall Mount
NumberOfBoxes : 4
NumberOfItems : 6
NumberOfPositions : 1
OperatingSystem : Linux
OperationMode : automatic
OutputType : Digital
PartNumber : 19144
PowerSourceType : Ac Mains
ProcessorCount : 1
ProductDescription :

Description:

Footprint: SOT23

Working Voltage 3~5V

Size: 25.5* 22.3mm

-The high-precision products combine the advantages of 12-bit resolution, as much as possible to help customers reduce the pressure drop on

the shunt resistor, thereby minimizing power loss and power consumption and save board space. The device can be sensed bus voltage range of 0 V to +26 V.

-INA219 can be achieved within the maximum error accuracy of +1% from -40° C to 85° C temperature range, the maximum offset is 100 uV.

-Programmable calibration register can be read in units of ampere direct current, and read the power in watts.

-I2C interface has a timeout setting, not only to prevent bus lock, but also provides high-speed mode, to meet the communication requirements of

up to 3.4 MHz.

-All properties INA219 are software programmable to support.

-A single power supply, the operating voltage of between +3.0 to + 5.5V.

-Up to 128 samples can be averaged to achieve filtering in noisy environments.

-Used for I2C port zero drift / bidirectional current / power monitoring sensor module

Package Included:

4pcs INA219 Bi-directional DC Current Power Supply Sensor Module

ProductSiteLaunchDate : 2021-03-31T03:46:09.137Z
Size : 3Pcs 30A
SpecificationMet : UL
SpecificUsesForProduct : Electronic
Style : 50A/1V
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Bipolar Transistor
TerminalType : Physical
UnitCount : 5
UnspscCode : 46171600
UpperTemperatureRating : 125 degrees_celsius
Voltage : 5 volts
WarrantyDescription : 1
WirelessCommStandard : 802_11_N