Cart 2 india

Specification
Brand : ONSEMI
BulletPoint : DC 3V-5V INA240 Bi-directional Current Detection Amplifier Current Control Module PWM Suppression Function
BulletPoint1 : Amplifier Type General Purpose
BulletPoint10 : Voltage - Supply Span (Min) 1.8 V
BulletPoint2 : Number of Circuits 4
BulletPoint3 : Output Type Rail-to-Rail
BulletPoint4 : Slew Rate 1V/µs
BulletPoint5 : Gain Bandwidth Product 2.2 MHz
BulletPoint6 : Current - Input Bias 80 nA
BulletPoint7 : Voltage - Input Offset 10 mV
BulletPoint8 : Current - Supply 900µA (x4 Channels)
BulletPoint9 : Current - Output / Channel 80 mA
Color : Black 0-50A
ExternallyAssignedProductIdentifier : 9354448768628
IncludedComponents : wires
ItemName : ONSEMI On Semi NCV33204DTBR2G IC, Operational Amplifier, QUAD, BIPOLAR, TSSOP, 14PIN, PLASTIC RoHS Compliant - Pack of
ItemPackageDimensions_Height : 2.3622047244094 inches
ItemPackageDimensions_Length : 5.9055118110236 inches
ItemPackageDimensions_Width : 4.7244094488189 inches
ItemPackageQuantity : 1
ItemTypeKeyword : current-sense-amplifiers
Manufacturer : ONSEMI
Material : Copper
ModelName : MOBYAT
ModelNumber : MOBYAT
MountingType : Surface Mount
NumberOfItems : 1
PartNumber : Lile_HFN_2289
ProductDescription : Product
Descriptions:


The INA240 device is a voltage-output, current-detecting amplifier with enhanced PWM suppression that detects voltage drops across shunt resistors in a wide common-mode voltage range from -4V to 80V independent of the supply voltage. The negative common-mode voltage allows the operating voltage of the device to be lower than the ground voltage, thus adapting the flyback period low power consumption of typical solenoid applications is a key issue. The enhanced PWM suppression capability provides a high level of suppression for large common-mode transients (△V/△t) in systems that use pulse width modulation (PWM) signals, such as motor drive and solenoid control systems. With this function, the current can be accurately measured without large transient and corresponding recovery ripple of the output voltage.


Product parameters:

Module type: High/low side, bidirectional, zero drift current detection amplifier, PWM suppression function

Chip model: INA240A2

Wide common-mode voltage range: -4V to 80V

Fixed gain: 50v/v

Power supply range: 3.0V to 5.0V

Current detection range: determined by sampling resistance, gain and supply

Common-mode rejection ratio: 132dB DC/93dB AC(50kHz)

Sampling mode: high/low side can be used, depending on the connection mode

Sampling resistance: 2512-0.1R, users can also configure


Ambient temperature: -25℃ < TA <85℃

Module size: 2*2.1MM

Application: Suitable for motor control, power management, solenoid and valve control, control, pressure regulator, etc
ProductSiteLaunchDate : 2024-07-12T15:05:34.647Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 32101500
Voltage1 : 50 volts
Voltage2 : 3 volts
Voltage3 : 5 volts