Cart 2 india

Specification
Brand : GODIYMODULES
BulletPoint : TDA7492P New and original liquid crystal TV audio driver TDA7492PE integrated electronic module chip 7492
BulletPoint1 : Working voltage: AC5-16V or DC6-24V
BulletPoint2 : The pre-amplifier is designed with two op amps, and one op amp is used for one channel, and the effect is much better than that of a single op amp and two channels.
BulletPoint3 : Built-in single power supply to dual power supply chip, so that it has the effect of dual power supply under single power supply
BulletPoint4 : Use large-capacity filter capacitors with rectifier circuit, which can be used for both AC and DC
BulletPoint5 : R1, R5 are the magnification setting resistors (the default is about 5 times magnification for delivery, you can change the magnification according to your own needs, the resistance can be selected from 5k-100k, the larger the resistance, the higher the magnification, if you use a plug-in resistor , you can remove the original chip resistor by soldering, and solder the plug-in resistor on the pads at both ends of the patch position)
ExternallyAssignedProductIdentifier1 : 646219475965
ExternallyAssignedProductIdentifier2 : 0646219475965
IncludedComponents : 1pcs
ItemName : Dual NE5532 Preamplifier Board AC5-16V DC6-24V Single Power Supply Amplifier Module Microphone Preamps Audio OP AMP Board
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : current-sense-amplifiers
Manufacturer : GODIYMODULES
NumberOfItems : 1
PartNumber : Mod-Red532-001
ProductDescription :

Features:

1. Using high-quality materials, the quality is guaranteed

2. The pre-amplifier is designed with two op amps, and one op amp is used for one channel, and the effect is much better than that of a single op amp and two channels.

3. Built-in single power supply to dual power supply chip, so that it has the effect of dual power supply under single power supply

4. Use large-capacity filter capacitors with rectifier circuit, which can be used for both AC and DC

5. Wide range of applications

parameter:

Working voltage: AC5-16V or DC6-24V

PCB size: 50mm*50mm

Overall height of the board: about 23mm

R1, R5 are the magnification setting resistors (the default is about 5 times magnification for delivery, you can change the magnification according to your own needs, the resistance can be selected from 5k-100k, the larger the resistance, the higher the magnification, if you use a plug-in resistor , you can remove the original chip resistor by soldering, and solder the plug-in resistor on the pads at both ends of the patch position)

Package list:

Amplifier board*1

Signal line*2

ProductSiteLaunchDate : 2024-10-10T01:30:43.647Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1