Cart 2 india

Specification
Brand : Fluke
BulletPoint1 : Peak Hold: Automatically hold the test value at a high point. Press the PEAK button in the test mode until the PEAK lamp lights up. The peak hold function is enabled; Data Hold: Press HOLD key to hold data in test mode, "HOLD" symbol display; Data review: "MR" symbol indicates that the data can be read up and down; Overflow display: Over range overflow function: "OLA" symbol display
BulletPoint2 : Line voltage: Line test below 60KV (with 5 sections insulation rod operation); Voltage alarm: When the battery voltage is lower than 4.8V, the battery voltage is low;Insulation strength: Section 5 between insulation rod and high-voltage detector shell: AC 100kV/rms; between high-voltage detector shell and iron core: AC1000V/rms
BulletPoint3 : Resolution: 0.01mA; Accuracy: ±1%rdg±5dgt (23°C±5°C, 80%r or less);Measurement method: Clamp CT, non-contact measurement, integral method; Automatic shutdown: 15 minutes or so automatically shut down
BulletPoint4 : The ammeter is composed of a high voltage detector and five high-voltage insulated rods. The insulation rod is light, with features such as moisture resistance, high temperature resistance, impact resistance, bending resistance, high insulation, and detachability. Instrument has peak hold, data retention, data storage (99 groups) and other functions
BulletPoint5 : ETCR9100 high and low voltage clamp ammeter for low voltage AC leakage current and current measurement up to 60kV. Range: 0.00mA~600A, jaw size is Φ33mm, special alloy for current clamp, magnetic shield technology, strong anti-jamming ability, ensure Measurement accuracy and stability
Color : Multicolor
ExternallyAssignedProductIdentifier : 6068183201151
ExternallyAssignedProductIdentifier1 : 0744370591361
ExternallyAssignedProductIdentifier2 : 744370591361
ExternallyAssignedProductIdentifier3 : 00095969786751
IncludedComponents : FLUKE-17XX IFLEXI 1500A 12IN, 4 PACK
ItemDisplayWeight : 0.02 pounds
ItemName : SSEYL ETCR 007AD AC/DC Clamp Leakage Current transducer
ItemPackageDimensions_Height : 24.8 centimeters
ItemPackageDimensions_Length : 5.8 centimeters
ItemPackageDimensions_Width : 18.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : current-clamps
Manufacturer : ETCR
Material : Plastic
MeasurementType : Ammeter
ModelNumber : ETCR 007AD
NumberOfBoxes : 1
NumberOfItems : 4
PackageLevel : unit
PartNumber : ETCR 007AD
PowerSourceType : Battery Powered
ProductDescription :
* Function Measurement of AC/DC current, leakage current
*Power Supply Zn-Mn dry battery, 6RL61, 9V. Continually using for 100 hours, connecting external power supply is also available for long time using.
*Test Mode Clip-on CT, non-contact measurement
*Clamp Size Φ7mm
*Input Range 0mA-60.0A AC/DC
*Output Voltage 10mV/A;100mV/A(corresponding)
*Output Range 1V peak max
*Resolution 1mA AC/DC
*Accuracy ±3%FS(23℃±5℃, below 5%rh)
*Phase Error ≤3°(AC 50Hz/60Hz; 23℃±2℃)
*Calibration Adjust ZERO to calibrate, eliminate external electric field interference
*Output Wire Core wire: signal positive output; shielding wire: signal ground
*Lead length 2m
*Dimension LWH: 168mm×65mm×34mm
*Frequency AC: 45Hz-400Hz DC: DC-100kHz
*Test Position Tested wire in the jaw center
*Line Voltage AC600V
*Weight 170g (Including the battery)
*Working Current 5mA
*Working Temperature and Humidity -10℃-50℃,below 80%rh
*Limit Temperature Error -10℃-0℃ and 40℃-50℃, within 2%rdg
*Storage Temperature and Humidity -10℃-60℃,below 70%rh
*Insulating Strength AC3700V/rms (between the alloy of the clamp and the housing)
*Applicable safety rules IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)
*Accessories Sensor: 1piece; Battery(6F22,9V): 1piece; User Manual/Warranty card/ Certification: 1 copy
ProductSiteLaunchDate : 2015-11-14T02:06:43.447Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 4