Cart 2 india

Specification
Brand : ASMC Industrial
BulletPoint1 : Please see the specifications in the table below for full details. If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.
BulletPoint2 : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.
BulletPoint3 : ASMC Industrial Brand fasteners are guaranteed to be of the highest quality and are lot controlled, providing traceability to the manufacturer and raw material.
BulletPoint4 : Gliding Type
Color1 : White
Color2 : Blue
ExteriorFinish : Nickel
ItemName : #6 Cup Washer/Countersunk Finishing Washer Low Carbon Steel Nickel Plated Pk 500
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 500
ItemTypeKeyword : cup-washers
Manufacturer : ASMC Industrial
Material : Low Carbon Steel
Material1 : Technopolymer Plastic
Material2 : Polyacetal (POM)
Material3 : Natural White Color Rubber
MetalType : Low Carbon Steel
MetalType1 : Carbon Steel
MetalType2 : Iron
ModelName : GN338
ModelNumber : 16WGBK
NumberOfItems : 500
NumberOfPieces : 500
PartNumber : 0000-101064
ProductDescription :

PRODUCT SPECIFICATIONS

Part #: 0000-101064

Fastener Type: Cup Washer / Countersunk Finishing Washer
Size Description: #6
Diameter/Nominal Size: #6*
Inside Diameter: 0.176"
Outside Diameter: 0.434"
Thickness: 0.087"
System of Measurement: Inch
Grade: 2
Material: Low Carbon Steel
Finish: Nickel Plated
Used with: Bolts/Screws up to Grade 5
Average Piece Weight: 0.0008000 lbs.

*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit).
Actual inside diameter is almost always larger than stated size.
Please see the Inside Diameter spec in the table above, if available.

Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.


ProductSiteLaunchDate : 2015-06-07T16:38:39.777Z
Size : #6
Style : Cup Washer / Countersunk Finishing Washer
UnitCount : 1
UnspscCode : 31161500
WasherType : Countersunk