Cart 2 india

Specification
Brand : ASMC Industrial
BulletPoint1 : Please see the specifications in the table below for full details. If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.
BulletPoint2 : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.
BulletPoint3 : ASMC Industrial Brand fasteners are guaranteed to be of the highest quality and are lot controlled, providing traceability to the manufacturer and raw material.
BulletPoint4 : PREVENTS LOOSE SCREWS AND BOLTS caused by vibration and prevents bolts or screws from pulling through. Additionally, these washers can also serve as spacers.
BulletPoint5 : ELECTRO GALVANIZED STEEL FINISH: For extra protection from rust and corrosion. Reuse these for multiple projects if needed.
BulletPoint6 : TYPE: SAE Flat Washers.
Color : Silver
ExteriorFinish : Nickel
GradeRating : 2
ItemName : 1/4" Cup Washer/Countersunk Finishing Washer Low Carbon Steel Nickel Plated Pk 250
ItemPackageQuantity : 250
ItemTypeKeyword : cup-washers
Manufacturer : ASMC Industrial
Material : Low Carbon Steel
MetalType : Alloy Steel
ModelNumber : modle
NumberOfItems : 250
NumberOfPieces : 250
PartNumber : 0000-103519
ProductDescription :

PRODUCT SPECIFICATIONS

Part #: 0000-103519

Fastener Type: Cup Washer / Countersunk Finishing Washer
Size Description: 1/4"
Diameter/Nominal Size: 1/4"*
Inside Diameter: 0.316"
Outside Diameter: 0.791"
Thickness: 0.157"
System of Measurement: Inch
Grade: 2
Material: Low Carbon Steel
Finish: Nickel Plated
Used with: Bolts/Screws up to Grade 5
Average Piece Weight: 0.0027000 lbs.

*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit).
Actual inside diameter is almost always larger than stated size.
Please see the Inside Diameter spec in the table above, if available.

Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.


ProductSiteLaunchDate : 2015-06-07T16:33:38.490Z
Size : 1/4"
Style : Cup Washer / Countersunk Finishing Washer
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31161500
WasherType : Flat