Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
AutoPartPosition : rear
AutoPartPosition1 : rear
AutoPartPosition2 : front
Brand : MYFANDOOR
BulletPoint1 : ✩Note:Please confirm the applicable fitment model,year and part number，before purchasing,you can ask us to make sure if it can fit your car
BulletPoint2 : ✩Replacement Part Number:YC3Z-2513560-CAD
BulletPoint3 : ✩Compatible with:Fit for Ford F-250 Super Duty Ford F-350 Super Duty Ford F-450 Super Duty for Ford F-550 Super Duty Ford Excursion 1999-2004
BulletPoint4 : ✩Offer service:1 years quality support for this!
BulletPoint5 : ✩Direct replacement:It is installed directly,save your time straightly! No need to modify your car,very convenience
Color : Gray
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 714487758247
ExternallyAssignedProductIdentifier2 : 0714487758247
FitType : Custom Fit
GpsrSafetyAttestation : 1
IncludedComponents : Comes with housing
IsAssemblyRequired : 1
ItemName : MYFANDOOR Dash Dashboard Cup Holder Fit for 1999-2004 Ford F250 F350 F450 F550 Super Duty Excursion Replaces# YC3Z-2513560-CAD
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 6.5 centimeters
ItemPackageDimensions_Width : 23.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-cup-holders
Manufacturer : MYFANDOOR
Material : Plastic
Material1 : Cotton
Material2 : Faux Leather
ModelName : YC3Z-2513560-CAD
ModelNumber : YC3Z-2513560-CAD
MountingType : Insert Mount
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : YC3Z-2513560-CAD
PackageLevel : unit
PartNumber : YC3Z-2513560-CAD
ProductDescription : How to Replacement?
Locate and remove two screws that hold the plastic bezel located below the cup holder. Place screws in safe location.Remove bezel and set aside. Attached to the bottom of thecup holder assembly are two vertical screws. Locate and remove these two screws. Set screws aside. Pull cup holder out as if you were going to use it. Locate and remove two screws to the right and left of the cup holder assembly. Set screws aside. These are the last two screws that hold the cup holder in its cavity.

Carefully pull the cup holder assembly from its cavity just far enough to place the Custom Bezel Mount behind the left mounting tab of the cup holder assembly. Install factory screws back into their original places.

Carefully reinstall the dash in reverse order by securing one plastic bezel, one cup holder assembly, and six screws. Your installation is complete.

Cup holders offer a specific storage space for most common drink cups. You must want to have some coffee or juice during your drive. A good cup holder will be an ideal place to take them with you.
This cup holder has arms that spread out to the sides, placing the drinks further apart than the original part. This makes room for a small ashtray between the drink holders.
When convenience is key and your vehicle needs a bit more interior storage, cup holder is a welcome part to every vehicle. The color of this cup holder is tan.
Compatible with:
Fit for Ford 1999-2004 F-250 Super Duty
Fit for Ford 1999-2004 F-350 Super Duty
Fit for Ford 1999-2004F-450 Super Duty
Fit for Ford 1999-2004 F-550 Super Duty
Fit for Ford 2000-2004 Excursion

ProductSiteLaunchDate : 2022-05-05T08:15:30.520Z
SeatCoverPlacement : Back Seat
Size : (2016-2023 Crew) Full Set
SpecificUsesForProduct : Automobiles
Style : For Tucson 2022 A
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
TargetAudience1 : Men
TargetAudience2 : Women
TargetGender : unisex
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 3 Years