Cart 2 india

Specification
Brand : Temco
BulletPoint : Bond 9" W Steel 3 Tines Hand Tiller Case of1
BulletPoint1 : 2 3/4" Sweep to Bolt on a Standard S-Tine to Make a Home Made Cultivator.
BulletPoint2 : 2 3/4" Sweep to Bolt on a Standard S-Tine to Make a Home Made Cultivator.
BulletPoint3 : 2 3/4" Sweep to Bolt on a Standard S-Tine, Sweeps are 1/4” thick, made to fit the Danish “S” tine and other field preparation equipment of this type.
BulletPoint4 : We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced.
BulletPoint5 : Visit the Largest Selection of Powersports & Mowers Aftermarket Parts Online on the Caltric Amazon store - www.amazon.com/caltric
Color : Black
ExternallyAssignedProductIdentifier1 : 198723849775
ExternallyAssignedProductIdentifier2 : 0198723849775
IsAssemblyRequired : 1
ItemName : 2 3/4" Sweep to Bolt on a Standard S-Tine Cultivator System
ItemPackageDimensions_Height : 149.86 centimeters
ItemPackageDimensions_Length : 20.32 centimeters
ItemPackageDimensions_Width : 50.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tillers
Manufacturer : Temco
Material : Alloy Steel
ModelName : hwqa-IKu8UyHUZyE-t1uMQwBobt
ModelNumber : hwqa-IKu8UyHUZyE-t1uMQwBobt
NumberOfItems : 1
OperationMode : Manual
PackageLevel : unit
PartNumber : 76A381
PowerSourceType : hand_powered
ProductDescription : Build Your Own Cultivator with Woodward Crossings' #76A381 2 3/4"" Sweep. Bolt Sweep on a Standard S-Tine. Sweeps are 1/4” thick, made to fit the Danish “S” tine and other field preparation equipment of this type. Also Available from Woodward Crossings to Create Your Own Cultivator: # 76A388 Clamp for Danish S-Tine to Fit on a 2”x2” Toolbar on a 3 Pt. Hitch Below (Sold Separately) Can Be Ordered # 76A386 Danish S-Tine Clamp (Sold Separately) Also available at Woodward Crossings are the following sweeps, tines and bolts to build your cultivator. Sweep is to be attached to the bottom of the S-Tine # 76A380 Sweep 1 (Not Included) # 76A382 Sweep 4 (Not Included) # 76A383 Sweep 7 (Not Included) # 7A9080 Bolts to Attach Sweeps to S-tines (Sold Separately) # HT02-04-L4 2 x 2 Toolbar for a 3 Point Hitch (Sold Separately) Suggested Setup from Woodward Crossings Tools Needed: Snug up Elliptical Bolts on S-Tines with 9/16” wrench You will need 3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar 11/16” Wrench to snug up the bolts on the S-Tine Clamps
SafetyWarning : Wear appropriate protective gear, including safety glasses and gloves. Be aware of moving parts and keep hands and other body parts away from the tines. Always turn off and allow the engine to cool before refueling or performing maintenance. Follow all safety instructions provided in the operator's manual.
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 21100000