Cart 2 india

Specification
Brand : VaVoger
BulletPoint1 : Special Design:This whiped cream pressure regulator fill station has a working pressure gauge (left side) and cylinder pressure gauge (right side), which can show the pressure accurately and clearly. You can adjust the release to the desired gas pressure value at one time, you want through the regulating valve
BulletPoint2 : Universal Pressure Regulator Gauge for Whip It Nitrous Tank: 580G, 640G,615G, 1100G Nitrous Oxide Chargers and Whipped Cream Dispenser with Whipped Cream Charger
BulletPoint3 : Precise Control:The cream pressure regulator has a pressure gauge on the left and right sides, which can show the pressure accurately and clearly, it allows you to adjust the release to the desired gas pressure value at one time, and use it accurate-ly.
BulletPoint4 : The pressure adjustment can only be adjusted from 0 to high, not from high to low. If you want to re-adjust the pressure and the adjusted pressure is lower than the original set pressure, you need to vent the air and then re-adjust the pressure.
BulletPoint5 : Use the hose as a connector to connect the 580g cylinders and the dispenser, release the pressure slowly, you can see the data according to the pressure gauge.
BulletPoint6 : Safety for Use : This Pressure Regulator has been rigorously tested to meet high standards in gas release pressure, safe and airtight. Easily screw the adapter on any brand cream dispenser on the market
CareInstructions : Hand Wash
Color : black regulator with hose
ExternallyAssignedProductIdentifier1 : 789616224375
ExternallyAssignedProductIdentifier2 : 0789616224375
GpsrSafetyAttestation : 1
IncludedComponents : o rings
ItemName : Upgrade Pressure Regulator for Whipped Cream Charger Suitable For Standard Whipping Cream Dispenser,Compatible with 0.95l Blue Tank
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : cream-chargers
Manufacturer : VaVoger
Material : Stainless Steel
ModelName : cream chargers kits6
ModelNumber : Cream kit6
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Cream kit6
ProductDescription : Attach to standard M11*1 Valve. Hand tighten to prevent leaks. Turn knob on front to increase or decrease pressure accordingly. Left gauge is output pressure.Right gauge is tank pressure. Recmmend 40-70 psi for most N2O dispensing applications. Runs longer than 10'may require higher pressures Fetures: Premium Pressure Gauges,Pressure Adjustment Knob,Aluminum Body,Output-8mm tube,Safety,Integral Safety Pressure relief valve releases at 120-125 PSI,Automatic Pressure Release valve How to use: Rotate the adjusting knob to the loosest status to prevent the gauge from explosives due to high pressure. Attach the regulator to the nitrous oxide tank. Connect the hose to the regulator and the tank. Slightily rotate the adajusting knob for the required pressure.
ProductSiteLaunchDate : 2024-12-04T09:08:59.473Z
Size : s
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 52150000