Cart 2 india

Specification
Brand : WoShewNu
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
Color : Light Blue, Silver
ExternallyAssignedProductIdentifier : 7645383880806
ExternallyAssignedProductIdentifier1 : 0769092631270
ExternallyAssignedProductIdentifier2 : 769092631270
IncludedComponents1 : 1* Foam Cutting Machine
IncludedComponents2 : 1* Power Adapter
IncludedComponents3 : 1* English Manual
IncludedComponents4 : Other Accessories for Assembly
ItemName : Tabletop Hot Wire Foam Cutter for Sponge, Portable Lightweight Thermocut Cutting Machine for Pearl Cotton Ribbon KT board Styrofoam Cutter Desktop Foam Cutting Machine (72W 100/240V)
ItemPackageDimensions_Height : 15.35 inches
ItemPackageDimensions_Length : 17.52 inches
ItemPackageDimensions_Width : 4.53 inches
ItemPackageQuantity : 1
ItemTypeKeyword : craft-shears
Manufacturer : WoShewNu
Material : Tungsten Steel
Material1 : Multilayer Board
Material2 : Stainless Steel
Material3 : Aluminum
ModelName : Tabletop Hot Wire Foam Cutter
ModelNumber : precise
NumberOfItems : 1
PartNumber : MUNEFE5c934h27rw-03
PowerSourceType : unknow
ProductDescription :

★Details

• Rubber Foot Pads: They can be slightly adjusted to ensure stability while protecting the table from being scratched.
• Guide Ruler: The stainless steel guide ruler can help you make straight cuts.
• LED Display: The adapter has an LED display that shows the voltage value in real-time for better control of the cutting process.
• Wire Storage Wheel: The large wire storage wheel can store up to about 65.61ft of heating wire, so you can finish your cutting work without having to replenish the wire frequently.

★Application

It can be used to cut foam, sponge, pearl cotton, ribbon, KT board, etc. It can cut angles, cylinders, sharp cones, rings, cones, straight lines, and other shapes.

★How to Install

1. Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws.
2. Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut.
3. Pull out the heating wire about 11.81in from the wire wheel.
4. Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machine's bottom. It should not fall off.
5. Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic.

★Specification

• Material: Multi-layer Board, Stainless Steel, Aluminum Alloy
• Color: Light Blue, Silver
• Mount Type: Countertop
• Assembly Required: Yes
• Plug Type: US Standard
• Power Supply: Corded Electric
• Adapter Input: 100-240V
• Voltage: 18V
• Power: 72W
• Preheating Time: 0-5 Seconds
• Cutting Height: 0-25cm/0-9.84 in
• Cutting Width: 0-28cm/0-11.02in
• Cutting Diameter: 0-19cm/0-7.48in
• Heating Wire Diameter: 0.28mm/0.01in
• Adjustable Temperature Range: 0~300℃/32~572℉
• Adjustable Bracket Angle Range: 30-90°
• Power Cord Length: 2.5m/8.2ft
• Workboard Size: 39*33cm/15.35*12.99in
• Package Size: 44.5*11.5*39cm/17.52*4.53*15.35in
• Gross Weight: 3.3kg/7.27 lbs
• Net Weight: 3kg/6.61lbs

★Package Included

• 1* Foam Cutting Machine
• 1* Power Adapter
• 1* English Manual
• Other Accessories for Assembly

Notes

1. Please read the manual completely before installation and use.
2. Please do not touch the heating wire of the cutting machine when the power is on. Please keep a certain distance from the heating wire. If necessary, wear gloves to avoid scalding. The heating wire should not be too red, otherwise, it is easy to break, and the life of the adapter will be affected.
3. Please use the product in a ventilated environment. It is not advisable to allow small children to play with this machine.
4. Please turn off the power when the product is not in use. Long-time idle burning may cause damage to the machine.
5. Please note that it is not suitable for fireproofing materials. When cutting, the cutting wire temperature is high, and attention should be paid to keeping away from flammable and explosive products.

ProductSiteLaunchDate : 2024-11-07T08:37:42.800Z
Size : 220V
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112700